Difference between revisions of "Rock3/dev/usb-gadget"
| (3 intermediate revisions by the same user not shown) | |||
| Line 14: | Line 14: | ||
{| class="wikitable" | {| class="wikitable" | ||
|- | |- | ||
| − | ! ROCK 3C || <---> || | + | ! ROCK 3C || <---> || ROCK 5B (Debian11) |
|- | |- | ||
| − | | Type-A OTG port || <---> || Type-A Host port | + | | Type-A OTG port || <---> || Type-A 3.0 Host port |
|} | |} | ||
===== Software Configuration ===== | ===== Software Configuration ===== | ||
| − | Step1: Enable USB OTG function | + | Step1: Install essential tools |
| + | |||
| + | root@rock-3c:~# apt update -y && apt install -y net-tools iperf | ||
| + | |||
| + | Step2: Enable USB OTG function (Do this only once) | ||
root@rock-3c:~# rsetup | root@rock-3c:~# rsetup | ||
| − | + | <pre> | |
| − | + | ┌──────────────────────────────────┤ RSETUP ├──────────────────────────────────┐ | |
| − | + | │ Please select an option below: │ | |
| − | + | │ │ | |
| − | + | │ System Maintaince │ | |
| − | + | │ Hardware │ | |
| − | + | │ Overlays │ | |
| − | + | │ Connectivity │ | |
| − | + | │ User Settings │ | |
| − | + | │ Localization │ | |
| − | + | │ About │ | |
| − | + | │ │ | |
| − | + | │ │ | |
| − | + | │ │ | |
| − | + | │ │ | |
| − | + | │ │ | |
| − | + | │ │ | |
| − | + | │ │ | |
| − | + | │ │ | |
| − | + | │ │ | |
| − | + | │ │ | |
| − | + | │ │ | |
| − | + | │ <Ok> <Cancel> │ | |
| − | + | │ │ | |
| + | └──────────────────────────────────────────────────────────────────────────────┘ | ||
| + | </pre> | ||
Select '''Manage overlays''' | Select '''Manage overlays''' | ||
| − | + | <pre> | |
| − | + | ┌──────────────────────────────────┤ RSETUP ├──────────────────────────────────┐ | |
| − | + | │ Configure Device Tree Overlay │ | |
| − | + | │ │ | |
| − | + | │ Manage overlays │ | |
| − | + | │ View overlay info │ | |
| − | + | │ Install overlay from source │ | |
| − | + | │ Reset overlays │ | |
| − | + | │ │ | |
| − | + | │ │ | |
| − | + | │ │ | |
| − | + | │ │ | |
| − | + | │ │ | |
| − | + | │ │ | |
| − | + | │ │ | |
| − | + | │ │ | |
| − | + | │ │ | |
| − | + | │ │ | |
| − | + | │ │ | |
| − | + | │ │ | |
| − | + | │ │ | |
| − | + | │ │ | |
| − | + | │ <Ok> <Cancel> │ | |
| − | + | │ │ | |
| + | └──────────────────────────────────────────────────────────────────────────────┘ | ||
| + | </pre> | ||
Select '''Set OTG port to OTG mode''' | Select '''Set OTG port to OTG mode''' | ||
| − | + | <pre> | |
| − | + | ┌──────────────────────────────────┤ RSETUP ├──────────────────────────────────┐ | |
| − | + | │ Please select overlays: │ | |
| − | + | │ │ | |
| − | + | │ [ ] Enable PWM14-M0 │ | |
| − | + | │ [ ] Enable PWM14-M1 ▒ │ | |
| − | + | │ [ ] Enable PWM15-M1 ▒ │ | |
| − | + | │ [ ] Enable PWM8-M0 ▒ │ | |
| − | + | │ [ ] Enable PWM9-M0 ▒ │ | |
| − | + | │ [ ] Enable Radxa 5-inch Touchscreen ▒ │ | |
| − | + | │ [ ] Enable Raspberry Pi 7-inch Touchscreen ▒ │ | |
| − | + | │ [ ] Enable Raspberry Pi Camera v1.3 ▒ │ | |
| − | + | │ [ ] Enable Raspberry Pi Camera v2 ▒ │ | |
| − | + | │ [ ] Enable UART2-M0 ▒ │ | |
| − | + | │ [ ] Enable UART3-M0 ▒ │ | |
| − | + | │ [ ] Enable UART4-M1 ▒ │ | |
| − | + | │ [ ] Enable UART5-M1 ▒ │ | |
| − | + | │ [ ] Enable UART9-M1 ▒ │ | |
| − | + | │ [ ] Enable spidev on SPI3-M1 over CS0 │ | |
| − | + | │ [*] Set OTG port to OTG mode │ | |
| − | + | │ │ | |
| − | + | │ │ | |
| − | + | │ <Ok> <Cancel> │ | |
| − | + | │ │ | |
| − | + | └──────────────────────────────────────────────────────────────────────────────┘ | |
| + | </pre> | ||
| + | |||
Select '''Ok'''' to confirm. | Select '''Ok'''' to confirm. | ||
| − | + | <pre> | |
| − | + | ┌──────────────────────────────────┤ RSETUP ├──────────────────────────────────┐ | |
| − | + | │ │ | |
| − | + | │ Selected overlays will be enabled at next boot. │ | |
| − | + | │ │ | |
| − | + | │ │ | |
| − | + | │ │ | |
| − | + | │ │ | |
| − | + | │ │ | |
| − | + | │ │ | |
| − | + | │ │ | |
| − | + | │ │ | |
| − | + | │ │ | |
| − | + | │ │ | |
| − | + | │ │ | |
| − | + | │ │ | |
| − | + | │ │ | |
| − | + | │ │ | |
| − | + | │ │ | |
| − | + | │ │ | |
| − | + | │ │ | |
| − | + | │ │ | |
| − | + | │ <Ok> │ | |
| − | + | │ │ | |
| + | └──────────────────────────────────────────────────────────────────────────────┘ | ||
| + | </pre> | ||
Click <code>Esc</code> to exit the window. | Click <code>Esc</code> to exit the window. | ||
| Line 137: | Line 149: | ||
root@rock-3c:~# reboot | root@rock-3c:~# reboot | ||
| + | Step3: Load kernel module | ||
| + | |||
| + | <pre> | ||
| + | root@rock-3c:~# modprobe g_ether | ||
| + | root@rock-3c:~# dmesg -c | ||
| + | [ 108.290807] using random self ethernet address | ||
| + | [ 108.290820] using random host ethernet address | ||
| + | [ 108.292182] usb0: HOST MAC 9a:ec:b8:df:56:60 | ||
| + | [ 108.292322] usb0: MAC 52:4c:1e:5e:dd:aa | ||
| + | [ 108.292382] using random self ethernet address | ||
| + | [ 108.292391] using random host ethernet address | ||
| + | [ 108.292504] g_ether gadget: Ethernet Gadget, version: Memorial Day 2008 | ||
| + | [ 108.292513] g_ether gadget: g_ether ready | ||
| + | [ 108.403372] dwc3 fcc00000.dwc3: device reset | ||
| + | [ 108.530261] dwc3 fcc00000.dwc3: device reset | ||
| + | [ 108.685170] g_ether gadget: high-speed config #2: RNDIS | ||
| + | </pre> | ||
| + | |||
| + | Step 4: Bring up the usb0 device | ||
| + | |||
| + | <pre> | ||
| + | root@rock-3c:~# ifconfig usb0 up | ||
| + | </pre> | ||
| + | |||
| + | Now you should have usb0 on ROCK 3C enabled. | ||
| + | |||
| + | Step 5: Check usb0 network card on ROCK 5B. | ||
| + | |||
| + | On ROCK 5B Debian11, the '''dmesg''' gives something like below: | ||
| + | |||
| + | <pre> | ||
| + | root@rock-5b:~# dmesg -c | ||
| + | [ 334.470377] usb 2-1: new high-speed USB device number 2 using ehci-platform | ||
| + | [ 334.620061] usb 2-1: New USB device found, idVendor=0525, idProduct=a4a2, bcdDevice= 4.19 | ||
| + | [ 334.620088] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 | ||
| + | [ 334.620107] usb 2-1: Product: RNDIS/Ethernet Gadget | ||
| + | [ 334.620125] usb 2-1: Manufacturer: Linux 4.19.193-1-rk356x with dwc3-gadget | ||
| + | [ 334.634014] rndis_host 2-1:2.0 usb0: register 'rndis_host' at usb-fc880000.usb-1, RNDIS device, c2:e5:aa:9d:8f:e0 | ||
| + | </pre> | ||
| + | |||
| + | '''usb0''' is the "USB network card" for ROCK 3C and ROCK 5B | ||
| + | |||
| + | Step 6: Setup USB Network | ||
| + | |||
| + | On ROCK 3C | ||
| + | |||
| + | <pre> | ||
| + | root@rock-3c:~# IP=10.0.1.1 | ||
| + | root@rock-3c:~# HOST_IP=10.0.1.1 | ||
| + | root@rock-3c:~# ifconfig usb0 $IP netmask 255.255.255.0 | ||
| + | root@rock-3c:~# route | ||
| + | Kernel IP routing table | ||
| + | Destination Gateway Genmask Flags Metric Ref Use Iface | ||
| + | 10.0.1.0 0.0.0.0 255.255.255.0 U 0 0 0 usb0 | ||
| + | </pre> | ||
| + | |||
| + | On ROCK 5B | ||
| + | |||
| + | <pre> | ||
| + | root@rock-5b:~# HOST_IP=10.0.1.2 | ||
| + | root@rock-5b:~# ifconfig usb0 $HOST_IP netmask 255.255.255.0 | ||
| + | </pre> | ||
| + | |||
| + | Step 7: Test network via '''ping''' | ||
| + | |||
| + | on ROCK 5B | ||
| + | |||
| + | <pre> | ||
| + | root@rock-5b:~# ifconfig usb0 | ||
| + | usb0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 | ||
| + | inet 10.0.1.2 netmask 255.255.255.0 broadcast 10.0.1.255 | ||
| + | ether c2:e5:aa:9d:8f:e0 txqueuelen 1000 (Ethernet) | ||
| + | RX packets 37 bytes 2464 (2.4 KiB) | ||
| + | RX errors 0 dropped 0 overruns 0 frame 0 | ||
| + | TX packets 145 bytes 28585 (27.9 KiB) | ||
| + | TX errors 58 dropped 0 overruns 0 carrier 0 collisions 0 | ||
| + | </pre> | ||
| + | |||
| + | On ROCK 3C, ping 'ROCK 5B' | ||
| + | <pre> | ||
| + | root@rock-3c:~# ping 10.0.1.2 | ||
| + | PING 10.0.1.2 (10.0.1.2) 56(84) bytes of data. | ||
| + | 64 bytes from 10.0.1.2: icmp_seq=1 ttl=64 time=0.805 ms | ||
| + | 64 bytes from 10.0.1.2: icmp_seq=2 ttl=64 time=0.612 ms | ||
| + | 64 bytes from 10.0.1.2: icmp_seq=3 ttl=64 time=0.489 ms | ||
| + | 64 bytes from 10.0.1.2: icmp_seq=4 ttl=64 time=0.495 ms | ||
| + | 64 bytes from 10.0.1.2: icmp_seq=5 ttl=64 time=0.407 ms | ||
| + | 64 bytes from 10.0.1.2: icmp_seq=6 ttl=64 time=0.357 ms | ||
| + | 64 bytes from 10.0.1.2: icmp_seq=7 ttl=64 time=0.314 ms | ||
| + | 64 bytes from 10.0.1.2: icmp_seq=8 ttl=64 time=0.493 ms | ||
| + | 64 bytes from 10.0.1.2: icmp_seq=9 ttl=64 time=0.469 ms | ||
| + | </pre> | ||
| + | |||
| + | Step 8: Test network throughput via 'iperf3' | ||
| + | |||
| + | on ROCK 5B | ||
| + | |||
| + | <pre> | ||
| + | root@rock-5b:~# iperf3 -s | ||
| + | ----------------------------------------------------------- | ||
| + | Server listening on 5201 | ||
| + | ----------------------------------------------------------- | ||
| + | Accepted connection from 10.0.1.1, port 32814 | ||
| + | [ 5] local 10.0.1.2 port 5201 connected to 10.0.1.1 port 32816 | ||
| + | [ ID] Interval Transfer Bitrate | ||
| + | [ 5] 0.00-1.00 sec 26.4 MBytes 222 Mbits/sec | ||
| + | [ 5] 1.00-2.00 sec 30.2 MBytes 253 Mbits/sec | ||
| + | [ 5] 2.00-3.00 sec 30.1 MBytes 253 Mbits/sec | ||
| + | [ 5] 3.00-4.00 sec 30.2 MBytes 253 Mbits/sec | ||
| + | [ 5] 4.00-5.00 sec 30.0 MBytes 252 Mbits/sec | ||
| + | [ 5] 5.00-6.00 sec 30.2 MBytes 253 Mbits/sec | ||
| + | [ 5] 6.00-7.00 sec 29.7 MBytes 249 Mbits/sec | ||
| + | [ 5] 7.00-8.00 sec 30.1 MBytes 253 Mbits/sec | ||
| + | [ 5] 8.00-9.00 sec 30.2 MBytes 253 Mbits/sec | ||
| + | [ 5] 9.00-10.00 sec 30.2 MBytes 253 Mbits/sec | ||
| + | [ 5] 10.00-10.04 sec 1.05 MBytes 246 Mbits/sec | ||
| + | - - - - - - - - - - - - - - - - - - - - - - - - - | ||
| + | [ ID] Interval Transfer Bitrate | ||
| + | [ 5] 0.00-10.04 sec 298 MBytes 249 Mbits/sec receiver | ||
| + | ----------------------------------------------------------- | ||
| + | Server listening on 5201 | ||
| + | ----------------------------------------------------------- | ||
| + | </pre> | ||
| − | + | on ROCK 3C | |
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | <pre> | |
| − | + | root@rock-3c:~# iperf3 -c 10.0.1.2 | |
| − | + | Connecting to host 10.0.1.2, port 5201 | |
| − | + | [ 5] local 10.0.1.1 port 32816 connected to 10.0.1.2 port 5201 | |
| + | [ ID] Interval Transfer Bitrate Retr Cwnd | ||
| + | [ 5] 0.00-1.00 sec 28.5 MBytes 239 Mbits/sec 0 238 KBytes | ||
| + | [ 5] 1.00-2.00 sec 30.3 MBytes 254 Mbits/sec 0 238 KBytes | ||
| + | [ 5] 2.00-3.00 sec 29.8 MBytes 250 Mbits/sec 0 238 KBytes | ||
| + | [ 5] 3.00-4.00 sec 30.3 MBytes 254 Mbits/sec 0 238 KBytes | ||
| + | [ 5] 4.00-5.00 sec 30.3 MBytes 254 Mbits/sec 0 259 KBytes | ||
| + | [ 5] 5.00-6.00 sec 30.2 MBytes 253 Mbits/sec 0 259 KBytes | ||
| + | [ 5] 6.00-7.00 sec 29.9 MBytes 251 Mbits/sec 0 283 KBytes | ||
| + | [ 5] 7.00-8.00 sec 29.6 MBytes 249 Mbits/sec 0 296 KBytes | ||
| + | [ 5] 8.00-9.00 sec 30.4 MBytes 255 Mbits/sec 0 296 KBytes | ||
| + | [ 5] 9.00-10.00 sec 30.4 MBytes 255 Mbits/sec 0 416 KBytes | ||
| + | - - - - - - - - - - - - - - - - - - - - - - - - - | ||
| + | [ ID] Interval Transfer Bitrate Retr | ||
| + | [ 5] 0.00-10.00 sec 300 MBytes 252 Mbits/sec 0 sender | ||
| + | [ 5] 0.00-10.04 sec 298 MBytes 249 Mbits/sec receiver | ||
| − | + | iperf Done. | |
| − | + | </pre> | |
Latest revision as of 07:48, 18 March 2023
ROCK 3 > Development > USB Gadget Support
Contents
USB Gadget Support
USB NET RNDIS
Hardware Connection
| ROCK 3C | <---> | ROCK 5B (Debian11) |
|---|---|---|
| Type-A OTG port | <---> | Type-A 3.0 Host port |
Software Configuration
Step1: Install essential tools
root@rock-3c:~# apt update -y && apt install -y net-tools iperf
Step2: Enable USB OTG function (Do this only once)
root@rock-3c:~# rsetup
┌──────────────────────────────────┤ RSETUP ├──────────────────────────────────┐ │ Please select an option below: │ │ │ │ System Maintaince │ │ Hardware │ │ Overlays │ │ Connectivity │ │ User Settings │ │ Localization │ │ About │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ <Ok> <Cancel> │ │ │ └──────────────────────────────────────────────────────────────────────────────┘
Select Manage overlays
┌──────────────────────────────────┤ RSETUP ├──────────────────────────────────┐ │ Configure Device Tree Overlay │ │ │ │ Manage overlays │ │ View overlay info │ │ Install overlay from source │ │ Reset overlays │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ <Ok> <Cancel> │ │ │ └──────────────────────────────────────────────────────────────────────────────┘
Select Set OTG port to OTG mode
┌──────────────────────────────────┤ RSETUP ├──────────────────────────────────┐ │ Please select overlays: │ │ │ │ [ ] Enable PWM14-M0 │ │ [ ] Enable PWM14-M1 ▒ │ │ [ ] Enable PWM15-M1 ▒ │ │ [ ] Enable PWM8-M0 ▒ │ │ [ ] Enable PWM9-M0 ▒ │ │ [ ] Enable Radxa 5-inch Touchscreen ▒ │ │ [ ] Enable Raspberry Pi 7-inch Touchscreen ▒ │ │ [ ] Enable Raspberry Pi Camera v1.3 ▒ │ │ [ ] Enable Raspberry Pi Camera v2 ▒ │ │ [ ] Enable UART2-M0 ▒ │ │ [ ] Enable UART3-M0 ▒ │ │ [ ] Enable UART4-M1 ▒ │ │ [ ] Enable UART5-M1 ▒ │ │ [ ] Enable UART9-M1 ▒ │ │ [ ] Enable spidev on SPI3-M1 over CS0 │ │ [*] Set OTG port to OTG mode │ │ │ │ │ │ <Ok> <Cancel> │ │ │ └──────────────────────────────────────────────────────────────────────────────┘
Select Ok' to confirm.
┌──────────────────────────────────┤ RSETUP ├──────────────────────────────────┐ │ │ │ Selected overlays will be enabled at next boot. │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ <Ok> │ │ │ └──────────────────────────────────────────────────────────────────────────────┘
Click Esc to exit the window.
Reboot ROCK 3C.
root@rock-3c:~# reboot
Step3: Load kernel module
root@rock-3c:~# modprobe g_ether root@rock-3c:~# dmesg -c [ 108.290807] using random self ethernet address [ 108.290820] using random host ethernet address [ 108.292182] usb0: HOST MAC 9a:ec:b8:df:56:60 [ 108.292322] usb0: MAC 52:4c:1e:5e:dd:aa [ 108.292382] using random self ethernet address [ 108.292391] using random host ethernet address [ 108.292504] g_ether gadget: Ethernet Gadget, version: Memorial Day 2008 [ 108.292513] g_ether gadget: g_ether ready [ 108.403372] dwc3 fcc00000.dwc3: device reset [ 108.530261] dwc3 fcc00000.dwc3: device reset [ 108.685170] g_ether gadget: high-speed config #2: RNDIS
Step 4: Bring up the usb0 device
root@rock-3c:~# ifconfig usb0 up
Now you should have usb0 on ROCK 3C enabled.
Step 5: Check usb0 network card on ROCK 5B.
On ROCK 5B Debian11, the dmesg gives something like below:
root@rock-5b:~# dmesg -c [ 334.470377] usb 2-1: new high-speed USB device number 2 using ehci-platform [ 334.620061] usb 2-1: New USB device found, idVendor=0525, idProduct=a4a2, bcdDevice= 4.19 [ 334.620088] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 334.620107] usb 2-1: Product: RNDIS/Ethernet Gadget [ 334.620125] usb 2-1: Manufacturer: Linux 4.19.193-1-rk356x with dwc3-gadget [ 334.634014] rndis_host 2-1:2.0 usb0: register 'rndis_host' at usb-fc880000.usb-1, RNDIS device, c2:e5:aa:9d:8f:e0
usb0 is the "USB network card" for ROCK 3C and ROCK 5B
Step 6: Setup USB Network
On ROCK 3C
root@rock-3c:~# IP=10.0.1.1 root@rock-3c:~# HOST_IP=10.0.1.1 root@rock-3c:~# ifconfig usb0 $IP netmask 255.255.255.0 root@rock-3c:~# route Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 10.0.1.0 0.0.0.0 255.255.255.0 U 0 0 0 usb0
On ROCK 5B
root@rock-5b:~# HOST_IP=10.0.1.2 root@rock-5b:~# ifconfig usb0 $HOST_IP netmask 255.255.255.0
Step 7: Test network via ping
on ROCK 5B
root@rock-5b:~# ifconfig usb0
usb0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 10.0.1.2 netmask 255.255.255.0 broadcast 10.0.1.255
ether c2:e5:aa:9d:8f:e0 txqueuelen 1000 (Ethernet)
RX packets 37 bytes 2464 (2.4 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 145 bytes 28585 (27.9 KiB)
TX errors 58 dropped 0 overruns 0 carrier 0 collisions 0
On ROCK 3C, ping 'ROCK 5B'
root@rock-3c:~# ping 10.0.1.2 PING 10.0.1.2 (10.0.1.2) 56(84) bytes of data. 64 bytes from 10.0.1.2: icmp_seq=1 ttl=64 time=0.805 ms 64 bytes from 10.0.1.2: icmp_seq=2 ttl=64 time=0.612 ms 64 bytes from 10.0.1.2: icmp_seq=3 ttl=64 time=0.489 ms 64 bytes from 10.0.1.2: icmp_seq=4 ttl=64 time=0.495 ms 64 bytes from 10.0.1.2: icmp_seq=5 ttl=64 time=0.407 ms 64 bytes from 10.0.1.2: icmp_seq=6 ttl=64 time=0.357 ms 64 bytes from 10.0.1.2: icmp_seq=7 ttl=64 time=0.314 ms 64 bytes from 10.0.1.2: icmp_seq=8 ttl=64 time=0.493 ms 64 bytes from 10.0.1.2: icmp_seq=9 ttl=64 time=0.469 ms
Step 8: Test network throughput via 'iperf3'
on ROCK 5B
root@rock-5b:~# iperf3 -s ----------------------------------------------------------- Server listening on 5201 ----------------------------------------------------------- Accepted connection from 10.0.1.1, port 32814 [ 5] local 10.0.1.2 port 5201 connected to 10.0.1.1 port 32816 [ ID] Interval Transfer Bitrate [ 5] 0.00-1.00 sec 26.4 MBytes 222 Mbits/sec [ 5] 1.00-2.00 sec 30.2 MBytes 253 Mbits/sec [ 5] 2.00-3.00 sec 30.1 MBytes 253 Mbits/sec [ 5] 3.00-4.00 sec 30.2 MBytes 253 Mbits/sec [ 5] 4.00-5.00 sec 30.0 MBytes 252 Mbits/sec [ 5] 5.00-6.00 sec 30.2 MBytes 253 Mbits/sec [ 5] 6.00-7.00 sec 29.7 MBytes 249 Mbits/sec [ 5] 7.00-8.00 sec 30.1 MBytes 253 Mbits/sec [ 5] 8.00-9.00 sec 30.2 MBytes 253 Mbits/sec [ 5] 9.00-10.00 sec 30.2 MBytes 253 Mbits/sec [ 5] 10.00-10.04 sec 1.05 MBytes 246 Mbits/sec - - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate [ 5] 0.00-10.04 sec 298 MBytes 249 Mbits/sec receiver ----------------------------------------------------------- Server listening on 5201 -----------------------------------------------------------
on ROCK 3C
root@rock-3c:~# iperf3 -c 10.0.1.2 Connecting to host 10.0.1.2, port 5201 [ 5] local 10.0.1.1 port 32816 connected to 10.0.1.2 port 5201 [ ID] Interval Transfer Bitrate Retr Cwnd [ 5] 0.00-1.00 sec 28.5 MBytes 239 Mbits/sec 0 238 KBytes [ 5] 1.00-2.00 sec 30.3 MBytes 254 Mbits/sec 0 238 KBytes [ 5] 2.00-3.00 sec 29.8 MBytes 250 Mbits/sec 0 238 KBytes [ 5] 3.00-4.00 sec 30.3 MBytes 254 Mbits/sec 0 238 KBytes [ 5] 4.00-5.00 sec 30.3 MBytes 254 Mbits/sec 0 259 KBytes [ 5] 5.00-6.00 sec 30.2 MBytes 253 Mbits/sec 0 259 KBytes [ 5] 6.00-7.00 sec 29.9 MBytes 251 Mbits/sec 0 283 KBytes [ 5] 7.00-8.00 sec 29.6 MBytes 249 Mbits/sec 0 296 KBytes [ 5] 8.00-9.00 sec 30.4 MBytes 255 Mbits/sec 0 296 KBytes [ 5] 9.00-10.00 sec 30.4 MBytes 255 Mbits/sec 0 416 KBytes - - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-10.00 sec 300 MBytes 252 Mbits/sec 0 sender [ 5] 0.00-10.04 sec 298 MBytes 249 Mbits/sec receiver iperf Done.