Difference between revisions of "Zero2/Hardware/GPIO"

Latest revision as of 03:20, 17 November 2022

English

 Radxa Zero 2 >  Hardware >  GPIO

General purpose input-output (GPIO) connector

Radxa Zero 2 has a 40-pin expansion header. Each pin is distinguished by color.

GPIO number	Function6	Function5	Function4	Function3	Function2	Function1	Pin#	Pin#	Function1	Function2	Function3	Function4	Function5	Function6	GPIO number
						+3.3V	1	2	+5.0V
490				I2C_EE_M3_SDA	WORLD_SYNC	GPIOA_14	3	4	+5.0V
491				I2C_EE_M3_SCL	IR_REMOTE_IN	GPIOA_15	5	6	GND
429		TDMC_DIN0	TDMC_D0	TSIN_B_VALID	PWM_D	GPIOZ_2	7	8	GPIOAO_0	UART_AO_A_TX					412
						GND	9	10	GPIOAO_1	UART_AO_A_RX					413
430			TDMC_DIN1	TDMC_D1	TSIN_B_SOP	GPIOZ_3	11	12	GPIOA_1	TDMB_SCLK	TDMB_SLV_SCLK				477
431			TDMC_DIN2	TDMC_D2	TSIN_B_DIN0	GPIOZ_4	13	14	GND
432			TDMC_DIN3	TDMC_D3	TSIN_B_CLK	GPIOZ_5	15	16	GPIOZ_8	ETH_RGMII_TX_CLK	BT656_A_DIN4	TSIN_B_DIN2	MCLK_1	I2C_EE_M0_SCL	435
						+3.3V	17	18	GPIOZ_6	TSIN_B_FAIL	TDMC_FS	TDMC_SLV_FS			433
447				SPI_B_MOSI	UART_EE_C_RTS	GPIOH_4	19	20	GND
448	TDMB_DIN3	TDMB_D3	PWM_F	SPI_B_MISO	UART_EE_C_CTS	GPIOH_5	21	22	GPIOZ_9	ETH_TXEN	BT656_A_DIN5	TSIN_B_DIN3			436
450		PWM_B	I2C_EE_M1_SCL	SPI_B_SCLK	UART_EE_C_TX	GPIOH_7	23	24	GPIOH_6	UART_EE_C_RX	SPI_B_SS0	I2C_EE_M1_SDA	IR_REMOTE_OUT		449
						GND	25	26	SARADC_CH2
427				PWM_B	I2C_EE_M0_SDA	GPIOZ_0	27	28	GPIOZ_1	I2C_EE_M0_SCL	PWM_C				428
419			TDMB_SLV_FS	TDMB_FS	TSIN_A_DIN0	GPIOAO_7	29	30	GND
480			PWM_D	TDMB_DIN1	TDMB_D1	GPIOA_4	31	32	GPIOA_0	MCLK_0					476
420		TDMB_SLV_SCLK	TDMB_SCLK	TSIN_A_CLK	UART_AO_B_TX	GPIOAO_8	33	34	GND
478				TDMB_SLV_FS	TDMB_FS	GPIOA_2	35	36	GPIOA_3	TDMB_D0	TDMB_DIN0				479
421		MCLK_0	TSIN_A_VALID	UART_AO_B_RX	IR_REMOTE_OUT	GPIOAO_9	37	38	GPIOA_5	PDM_DIN3	TDMB_DIN2	TDMB_D2			481
						GND	39	40	GPIOZ_7	I2C_EE_M0_SDA	TSIN_B_DIN1	TDMC_SCLK	TDMC_SLV_SCLK		434

More details about 40-pin Header

The device number listed below is for reference only. Depending on how many devices you have enabled the number for each can change.

I2C devices (3)

I2C_EE_M0 (/dev/i2c-0)
I2C_EE_M1 (/dev/i2c-1)
I2C_EE_M3 (/dev/i2c-3)

I2S device (1)

TDMB

PWM devices (4)

PWM_B (/sys/class/pwm/pwmchip6/pwm1)
PWM_C (/sys/class/pwm/pwmchip4/pwm0)
PWM_D (/sys/class/pwm/pwmchip4/pwm1)
PWM_F (/sys/class/pwm/pwmchip2/pwm1)

To use PWM_C and PWM_D together, please use meson-g12b-pwm-c-d-gpioz-1-2 overlay instead of individual overlays.

UART devices (3)

UART_AO_A (/dev/ttyAML0)
UART_AO_B (/dev/ttyAML6)
UART_EE_C (/dev/ttyAML7)

if you enable UART_AO_B only or only enable UART_EE_C, the UART device is /dev/ttyAML6, if you enable UART_AO_B and UART_EE_C at the same time, the device of UART_AO_B is /dev/ttyAML6, and UART_EE_C is /dev/ttyAML7

SPI device (1)

SPI_B (/dev/spidev0.0)

GPIO number

GPIO Chip	GPIO Name	Base	Offset	Formula
First	GPIOAO_x	412	0-11	Base + Offset
First	GPIOE_x	424	0-2	Base + Offset
Second	GPIOZ_x	427	0-15	Base + Offset
Second	GPIOH_x	443	0-8	Base + Offset
Second	BOOT_x	452	0-15	Base + Offset
Second	GPIOC_x	468	0-7	Base + Offset
Second	GPIOA_x	476	0-15	Base + Offset
Second	GPIOX_x	492	0-19	Base + Offset

Take GPIOX_10 as an example.

The base is 492 and the offset is 10. So the GPIOX_10's GPIO number is 492+10=502.

We recommend you to use gpiod and libmraa, which support accessing GPIO pins by 40-pin header number, instead of SoC defined GPIO number.

@@ Line 26: / Line 26: @@
 ! Function4
 ! Function5
+! Function6
 ! GPIO number
 |-
@@ Line 42: / Line 43: @@
 |
 |
+|
 |
 |
 |-
-|
+| 490
 |
 |
@@ Line 57: / Line 59: @@
 | +5.0V
 |
+|
 |
 |
@@ Line 62: / Line 65: @@
 |
 |-
-|
+| 491
 |
 |
@@ Line 78: / Line 81: @@
 |
 |
-|-
 |
+|-
+| 429
 |
 | TDMC_DIN0
@@ Line 95: / Line 99: @@
 |
 |
+| 412
 |-
 |
@@ Line 112: / Line 117: @@
 |
 |
+| 413
 |-
-|
+| 430
 |
 |
@@ Line 129: / Line 135: @@
 |
 |
+| 477
 |-
-|
+| 431
 |
 |
@@ Line 147: / Line 154: @@
 |
 |-
-|
+| 432
 |
 |
@@ Line 156: / Line 163: @@
 | style="background-color:#008000; color:#FFF;" | 15
 |
-| style="background-color:#808000; color:#FFF;" | 16
+| style="background-color:#008000; color:#FFF;" | 16
-| NC
+| GPIOZ_8
-|
+| ETH_RGMII_TX_CLK
-|
+| BT656_A_DIN4
-|
+| TSIN_B_DIN2
-|
+| MCLK_1
-|
+| I2C_EE_M0_SCL
+| 435
 |-
 |
@@ Line 180: / Line 188: @@
 |
 |
+| 433
 |-
-|
+| 447
 |
 |
@@ Line 198: / Line 207: @@
 |
 |-
-|
+| 448
 | TDMB_DIN3
 | TDMB_D3
@@ Line 208: / Line 217: @@
 |
 | style="background-color:#008000; color:#FFF;" | 22
-| SARADC_CH3
+| GPIOZ_9
-|
+| ETH_TXEN
-|
+| BT656_A_DIN5
-|
+| TSIN_B_DIN3
 |
 |
+| 436
 |-
-|
+| 450
 |
 | PWM_B
@@ Line 231: / Line 241: @@
 | IR_REMOTE_OUT
 |
+| 449
 |-
 |
@@ Line 249: / Line 260: @@
 |
 |-
-|
+| 427
 |
 |
@@ Line 262: / Line 273: @@
 | I2C_EE_M0_SCL
 | PWM_C
+|
+|
 |
-|
+| 428
-|
 |-
-|
+| 419
 |
 |
@@ Line 283: / Line 295: @@
 |
 |-
+| 480
 |
 |
-|
+| PWM_D
-|
+| TDMB_DIN1
-| TDMC_SLV_FS
+| TDMB_D1
-| TDMC_FS
+| GPIOA_4
-| GPIOA_13
 | style="background-color:#008000; color:#FFF;" | 31
 |
@@ Line 299: / Line 311: @@
 |
 |
+| 476
 |-
-|
+| 420
 |
 | TDMB_SLV_SCLK
@@ Line 317: / Line 330: @@
 |
 |-
-|
+| 478
 |
 |
@@ Line 327: / Line 340: @@
 |
 | style="background-color:#008000; color:#FFF;" | 36
-| GPIOC_7
+| GPIOA_3
-| PCIECK_REQN
+| TDMB_D0
-| WORLD_SYNC
+| TDMB_DIN0
 |
 |
 |
+| 479
 |-
-|
+| 421
 |
 | MCLK_0
@@ Line 350: / Line 364: @@
 |
 |
+| 481
 |-
 |
@@ Line 367: / Line 382: @@
 | TDMC_SLV_SCLK
 |
+|434
 |}
 === More details about 40-pin Header ===
+The device number listed below is for reference only. Depending on how many devices you have enabled the number for each can change.
 I2C devices (3)
@@ Line 375: / Line 393: @@
 * I2C_EE_M1 (/dev/i2c-1)
 * I2C_EE_M3 (/dev/i2c-3)
+I2S device (1)
+* TDMB
 PWM devices (4)
@@ Line 388: / Line 409: @@
 * UART_AO_B (/dev/ttyAML6)
 * UART_EE_C (/dev/ttyAML7)
+if you  enable UART_AO_B only or only enable UART_EE_C, the UART device is /dev/ttyAML6, if you enable UART_AO_B and UART_EE_C at the same time,
+the device of UART_AO_B is /dev/ttyAML6, and UART_EE_C is /dev/ttyAML7
 SPI device (1)
-* SPI_B (/dev/spidev1.0)
+* SPI_B (/dev/spidev0.0)
 === GPIO number ===