Difference between revisions of "Rock3/extlinux"
(→SPI) |
(→Common Hardware Interfaces, I2C, PWM, SPI, UART, CAN, etc) |
||
| (4 intermediate revisions by the same user not shown) | |||
| Line 18: | Line 18: | ||
<div class="tab-pane active" id="common-hardware-interface-3a"> | <div class="tab-pane active" id="common-hardware-interface-3a"> | ||
| + | |||
| + | ==== I2C ==== | ||
| + | |||
| + | ==== PWM ==== | ||
| + | |||
| + | ==== SPI ==== | ||
| + | |||
| + | ==== UART ==== | ||
| + | |||
| + | ==== CAN ==== | ||
| + | |||
| + | </div> <!-- id="common-hardware-interface-3a" end--> | ||
| + | |||
| + | <div id="common-hardware-interface-3b" class="tab-pane"> | ||
| + | |||
| + | ==== I2C ==== | ||
| + | |||
| + | ==== PWM ==== | ||
| + | |||
| + | ==== SPI ==== | ||
| + | |||
| + | ==== UART ==== | ||
| + | |||
| + | ==== CAN ==== | ||
| + | |||
| + | |||
| + | </div> <!-- id="common-hardware-interface-3b" end--> | ||
| + | <div id="common-hardware-interface-3c" class="tab-pane"> | ||
==== I2C ==== | ==== I2C ==== | ||
| Line 49: | Line 77: | ||
==== UART ==== | ==== UART ==== | ||
| − | System default enable uart2-m0 | + | System default enable uart2-m0 to be debug console. |
| − | + | fdtoverlays /dtbs/4.19.193-53-rockchip-gc36f859f0a63/rockchip/overlay/rk3568-fiq-debugger-uart2m0.dtbo | |
| − | If you want to enable uart2-m0 (/dev/ttyS2) to be normal | + | If you want to enable uart2-m0 (/dev/ttyS2) to be normal uart, modify item "/dtbs/4.19.193-53-rockchip-gc36f859f0a63/rockchip/overlay/rk3568-uart2-m0.dtbo" to the "fdtoverlays " line. |
| − | + | fdtoverlays /dtbs/4.19.193-53-rockchip-gc36f859f0a63/rockchip/overlay/rk3568-uart2-m0.dtbo | |
==== CAN ==== | ==== CAN ==== | ||
| + | To enable can (can0), add item "/boot/dtbs/4.19.193-53-rockchip-gc36f859f0a63/rockchip/overlay/rk3568-can1-m0.dtbo" to the "fdtovlays " line. | ||
| − | + | fdtoverlays /boot/dtbs/4.19.193-53-rockchip-gc36f859f0a63/rockchip/overlay/rk3568-can1-m0.dtbo | |
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| + | </div><!-- id="common-hardware-interface-3c" end--> | ||
<div id="common-hardware-interface-cm3io" class="tab-pane"> | <div id="common-hardware-interface-cm3io" class="tab-pane"> | ||
Latest revision as of 07:05, 8 November 2022
Contents
Common Hardware Interfaces, I2C, PWM, SPI, UART, CAN, etc
This page teaches how to enable overlays in file /boot/extlinux/extlinux.conf. The directory /dtbs/4.19.193-53-rockchip-gc36f859f0a63/rockchip/overlay/ includes overlays you can enable, to enable overlay, we just need add an absolute path of overlay after the key word fdtoverlays, there is a space between each overlay and a space between fdtoverlays and overlay's absolute path, for example,
fdtoverlays /dtbs/4.19.193-53-rockchip-gc36f859f0a63/rockchip/overlay/rk3568-fiq-debugger-uart2m0.dtbo /dtbs/4.19.193-53-rockchip-gc36f859f0a63/rockchip/overlay/rk3568-disable-npu.dtbo /dtbs/4.19.193-53-rockchip-gc36f859f0a63/rockchip/overlay/rk3568-spi3-m1-cs0-spidev.dtbo
The examples above indicates that rk3568-fiq-debugger-uart2m0 and rk3568-disable-npu and rk3568-spi3-m1-cs0-spidev and are enabled
To enable I2C, PWM, SPI, UART, CAN, etc, please see RK3566/RK3568 Available Overlay (ROCK 3A, ROCK 3B, Radxa CM3) part of Device Tree Overlays
I2C
PWM
SPI
UART
CAN
I2C
PWM
SPI
UART
CAN
I2C
To enable I2C-3 (/dev/i2c-3), add item "/boot/dtbs/4.19.193-53-rockchip-gc36f859f0a63/rockchip/overlay/rk3568-i2c2-m0.dtbo" to the "fdtovlays " line.
fdtoverlays /boot/dtbs/4.19.193-53-rockchip-gc36f859f0a63/rockchip/overlay/rk3568-i2c3-m0.dtbo
PWM
PWM0
Option 1: PWM0-M0
To enable PWM0-M0, add item "/boot/dtbs/4.19.193-53-rockchip-gc36f859f0a63/rockchip/overlay/rk3568-pwm0-m0.dtbo" to the "fdtoverlays " line.
fdtoverlays /boot/dtbs/4.19.193-53-rockchip-gc36f859f0a63/rockchip/overlay/rk3568-pwm0-m0.dtbo
The related directory /sys/devices/platform/fdd70000.pwm/pwm/pwmchip* will be created.
And you can do the operation in the directory.
Option 2: PWM0-M1
To enable PWM0-M0, add item "/boot/dtbs/4.19.193-53-rockchip-gc36f859f0a63/rockchip/overlay/rk3568-pwm0-m1.dtbo" to the "fdtoverlays " line.
fdtoverlyas /boot/dtbs/4.19.193-53-rockchip-gc36f859f0a63/rockchip/overlay/rk3568-pwm0-m1.dtbo
The related directory /sys/devices/platform/fdd70000.pwm/pwm/pwmchip* will be created.
SPI
To enable spi3 (/dev/spidev3.0), add item "/boot/dtbs/4.19.193-53-rockchip-gc36f859f0a63/rockchip/overlay/rk3568-spi3-m0-cs0-spidev.dtbo" to the "fdtovlays " line.
fdtoverlays /boot/dtbs/4.19.193-53-rockchip-gc36f859f0a63/rockchip/overlay/rk3568-spi3-m0-cs0-spidev.dtbo
UART
System default enable uart2-m0 to be debug console.
fdtoverlays /dtbs/4.19.193-53-rockchip-gc36f859f0a63/rockchip/overlay/rk3568-fiq-debugger-uart2m0.dtbo
If you want to enable uart2-m0 (/dev/ttyS2) to be normal uart, modify item "/dtbs/4.19.193-53-rockchip-gc36f859f0a63/rockchip/overlay/rk3568-uart2-m0.dtbo" to the "fdtoverlays " line.
fdtoverlays /dtbs/4.19.193-53-rockchip-gc36f859f0a63/rockchip/overlay/rk3568-uart2-m0.dtbo
CAN
To enable can (can0), add item "/boot/dtbs/4.19.193-53-rockchip-gc36f859f0a63/rockchip/overlay/rk3568-can1-m0.dtbo" to the "fdtovlays " line.
fdtoverlays /boot/dtbs/4.19.193-53-rockchip-gc36f859f0a63/rockchip/overlay/rk3568-can1-m0.dtbo