Difference between revisions of "Zero/hardware/revisions"
RadxaYuntian (Talk | contribs) |
|||
(One intermediate revision by one other user not shown) | |||
Line 19: | Line 19: | ||
* Moved 1L2 and 1L4 apart to reduce the likelihood of shorting the circuit | * Moved 1L2 and 1L4 apart to reduce the likelihood of shorting the circuit | ||
* Replaced FUSB340 with CH482 | * Replaced FUSB340 with CH482 | ||
− | * The Power LED now can be controlled by | + | * The Power LED now can be controlled by GPIOAO_8 |
+ | * Pin 35 (GPIOAO_8) is <b>NOT</b> connected on the 40-pin header as a result | ||
|- | |- | ||
| 1.5 | | 1.5 | ||
| Minor adjustment | | Minor adjustment | ||
* Switched to a different USB Configuration Channel controller due to part shortage | * Switched to a different USB Configuration Channel controller due to part shortage | ||
+ | |- | ||
+ | | 1.51 | ||
+ | | Major adjustment | ||
+ | * The Power LED now can be controlled by GPIOAO_10 | ||
+ | * Pin 35 (GPIOAO_8) is now <b>connected </b>on the 40-pin header as a result | ||
+ | * Pin 38 (GPIOAO_10) is now <b>NOT</b> connected on the 40-pin header | ||
|} | |} |
Latest revision as of 07:46, 7 November 2022
Radxa Zero > Hardware > Hardware revisions
Version | Comment |
---|---|
1.3 | Final prototype version |
1.4 | First production version
|
1.5 | Minor adjustment
|
1.51 | Major adjustment
|