Notice: Radxa Wiki is no longer maintained and content is for reference only. Please visit the latest Radxa Documentation site:
docs.radxa.com
Difference between revisions of "Zero/hardware/revisions"
RadxaYuntian (Talk | contribs) |
RadxaYuntian (Talk | contribs) |
||
| (3 intermediate revisions by 2 users not shown) | |||
| Line 15: | Line 15: | ||
| 1.4 | | 1.4 | ||
| First production version | | First production version | ||
| − | + | * Corrected the footprint on the TYPE-C connector | |
| − | Reduced the footprint of ESD0402 | + | * Reduced the footprint size of ESD0402 |
| − | Moved 1L2 and 1L4 apart to reduce the likelihood of shorting the circuit | + | * Moved 1L2 and 1L4 apart to reduce the likelihood of shorting the circuit |
| − | Replaced FUSB340 with CH482 | + | * Replaced FUSB340 with CH482 |
| − | </ | + | * The Power LED now can be controlled by GPIOAO_8 |
| + | * Pin 35 (GPIOAO_8) is <b>NOT</b> connected on the 40-pin header as a result | ||
|- | |- | ||
| 1.5 | | 1.5 | ||
| Minor adjustment | | Minor adjustment | ||
| − | + | * Switched to a different USB Configuration Channel controller due to part shortage | |
| − | + | |- | |
| + | | 1.51 | ||
| + | | Major adjustment | ||
| + | * The Power LED now can be controlled by GPIOAO_10 | ||
| + | * Pin 35 (GPIOAO_8) is now <b>connected </b>on the 40-pin header as a result | ||
| + | * Pin 38 (GPIOAO_10) is now <b>NOT</b> connected on the 40-pin header | ||
|} | |} | ||
Latest revision as of 07:46, 7 November 2022
Radxa Zero > Hardware > Hardware revisions
| Version | Comment |
|---|---|
| 1.3 | Final prototype version |
| 1.4 | First production version
|
| 1.5 | Minor adjustment
|
| 1.51 | Major adjustment
|