Please enable javascript, or click here to visit my ecommerce web site powered by Shopify.
Jump to: navigation, search

Template:Device-tree-overlays-rock3

Device Tree Overlays: ROCK 3

Introduction

This page discribes device tree overlays on ROCK 3. Device tree overlays is controlled by file /boot/uEnv.txt. You can do the setting for ROCK 3 in your /boot/uEnv.txt, which should cause your ROCK 3 to do your wanted things after a reboot.

In /boot/dtbs/$(uname -r)/rockchip/overlay/ you will find many *.dtbo files. The loader will merge the selected *.dtbo files by reading the file /boot/uEnv.txt.

File uEnv.txt

/boot/uEnv.txt contents:

 overlays=rk3568-uart0 rk3568-can1-m0 rk3568-pwm13-m0
 param_w1_pin=GPIO3_A5

Add names of overlays you want to activate to overlays= line in /boot/uEnv.txt, separated with spaces.

Add required parameters with their values to /boot/uEnv.txt, one per line.

Add optional parameters with their values to /boot/uEnv.txt if you want to change the default value, one per line.

U-Boot Environment Variable

  • verbosity

Kernel log level: 1~7

 verbosity=7
  • rootfstype

root filesystem type: ext4

 rootfstype=ext4
  • fdtfile

Kernel device tree name with the prefix, rockchip/

 fdtfile=rockchip/rk3566-radxa-cm3-io.dtb
  • extraargs
    • Driver module parameters
 extraargs=mem=512MB max_loop=8

RK3566/RK3568 Available Overlay (ROCK 3 A, ROCK 3 B, Radxa E23, Radxa E25)

  • rk3568-can1-m0 rk3568-can1-m1
  • rk3568-i2c2-m0 rk3568-i2c3-m0
  • rk3568-pwm1-m0 rk3568-pwm1-m1 rk3568-pwm2-m0 rk3568-pwm2-m1 rk3568-pwm8-m0-fan rk3568-pwm9-m0 rk3568-pwm12-m0 rk3568-pwm12-m1 rk3568-pwm13-m0 rk3568-pwm13-m1 rk3568-pwm14-m0 rk3568-pwm14-m1 k3568-pwm15-m0 rk3568-pwm15-m1
  • rk3568-spi3-m1-cs0-spidev
  • rk3568-uart0 rk3568-uart3-m0 rk3568-uart3-m1 rk3568-uart5-m1 rk3568-uart7-m1 rk3568-uart8-m1 rk3568-uart9-m1
  • rk3568-w1-gpio
rk3568-can1-m0

Activates CAN bus 1 M0

CAN1 M0 pins: CAN1_RX_M0, CAN1_TX_M0

Usage: Add the item "rk3568-can1-m0" to "overlays=" line in /boot/uEnv.txt.

overlays=rk3568-can1-m0
rk3568-can1-m1

Activates CAN bus 1 M1

CAN1 M0 pins: CAN1_RX_M1, CAN1_TX_M1

Usage: Add the item "rk3568-can1-m1" to "overlays=" line in /boot/uEnv.txt.

overlays=rk3568-can1-m1
rk3568-i2c2-m0

Activates I2C bus 2 M0

I2C2 M0 pins: I2C2_SDA_M0, I2C2_SCL_M0

Usage: Add the item "rk3568-i2c2-m0" to "overlays=" line in /boot/uEnv.txt.

overlays=rk3568-i2c2-m0
rk3568-i2c3-m0

Activates I2C bus 3 M0

I2C3 M0 pins: I2C3_SDA_M0, I2C3_SCL_M0

Usage: Add the item "rk3568-i2c3-m0" to "overlays=" line in /boot/uEnv.txt.

overlays=rk3568-i2c3-m0
rk3568-pwm1-m0

Activates PWM1_M0

Usage: Add the item "rk3568-pwm1-m0" to "overlays=" line in /boot/uEnv.txt.

overlays=rk3568-pwm1-m0
rk3568-pwm1-m1

Activates PWM1_M1

Usage: Add the item "rk3568-pwm1-m1" to "overlays=" line in /boot/uEnv.txt.

overlays=rk3568-pwm1-m1
rk3568-pwm2-m0

Activates PWM2_M0

Usage: Add the item "rk3568-pwm2-m0" to "overlays=" line in /boot/uEnv.txt.

overlays=rk3568-pwm2-m0
rk3568-pwm2-m1

Activates PWM2_M1

Usage: Add the item "rk3568-pwm2-m1" to "overlays=" line in /boot/uEnv.txt.

overlays=rk3568-pwm2-m1
rk3568-pwm8-m0-fan

Activates PWM8_M0

Usage: Add the item "rk3568-pwm8-m0-fan" to "overlays=" line in /boot/uEnv.txt.

overlays=rk3568-pwm8-m0-fan
rk3568-pwm9-m0

Activates PWM9_M0

Usage: Add the item "rk3568-pwm9-m0" to "overlays=" line in /boot/uEnv.txt.

overlays=rk3568-pwm9-m0
rk3568-pwm12-m0

Activates PWM12_M0

Usage: Add the item "rk3568-pwm12-m0" to "overlays=" line in /boot/uEnv.txt.

overlays=rk3568-pwm12-m0
rk3568-pwm12-m1

Activates PWM12_M1

Usage: Add the item "rk3568-pwm12-m1" to "overlays=" line in /boot/uEnv.txt.

overlays=rk3568-pwm12-m1
rk3568-pwm13-m0

Activates PWM13_M0

Usage: Add the item "rk3568-pwm13-m0" to "overlays=" line in /boot/uEnv.txt.

overlays=rk3568-pwm13-m0
rk3568-pwm13-m1

Activates PWM13_M1

Usage: Add the item "rk3568-pwm13-m1" to "overlays=" line in /boot/uEnv.txt.

overlays=rk3568-pwm13-m1
rk3568-pwm14-m0

Activates PWM14_M0

Usage: Add the item "rk3568-pwm14-m0" to "overlays=" line in /boot/uEnv.txt.

overlays=rk3568-pwm14-m0
rk3568-pwm14-m1

Activates PWM14_M1

Usage: Add the item "rk3568-pwm14-m1" to "overlays=" line in /boot/uEnv.txt.

overlays=rk3568-pwm14-m1
rk3568-pwm15-m0

Activates PWM15_M0

Usage: Add the item "k3568-pwm15-m0" to "overlays=" line in /boot/uEnv.txt.

overlays=k3568-pwm15-m0
rk3568-pwm15-m1

Activates PWM15_M1

Usage: Add the item "rk3568-pwm15-m1" to "overlays=" line in /boot/uEnv.txt.

overlays=rk3568-pwm15-m1
rk3568-spi3-m1-cs0-spidev

Activates SPI3 M0 (/dev/spidev3.0)

SPI3 M1 pins: SPI3_CS0_M1, SPI3_CLK_M1, SPI3_MOSI_M1, SPI3_MISO_M1

Usage: Add the item "rk3568-spi3-m1-cs0-spidev" to "overlays=" line in /boot/uEnv.txt.

overlays=rk3568-spi3-m1-cs0-spidev
rk3568-uart0

Activates serial port 0 (/dev/ttyS0)

UART0 pins: UART0_RX, UART0_TX

Usage: Add the item "rk3568-uart0" to "overlays=" line in /boot/uEnv.txt.

overlays=rk3568-uart0
rk3568-uart3-m0

Activates serial port 3 on M0 (/dev/ttyS3)

UART3 M0 pins: UART3_RX_M0, UART3_TX_M0

Usage: Add the item "rk3568-uart3-m0" to "overlays=" line in /boot/uEnv.txt.

overlays=rk3568-uart3-m0
rk3568-uart3-m1

Activates serial port 3 on M1 (/dev/ttyS3)

UART3 M1 pins: UART3_RX_M1, UART3_TX_M1

Usage: Add the item "rk3568-uart3-m1" to "overlays=" line in /boot/uEnv.txt.

overlays=rk3568-uart3-m1
rk3568-uart5-m1

Activates serial port 5 on M1 (/dev/ttyS5)

UART5 M1 pins: UART5_RX_M1, UART5_TX_M1

Usage: Add the item "rk3568-uart5-m1" to "overlays=" line in /boot/uEnv.txt.

overlays=rk3568-uart5-m1
rk3568-uart7-m1

Activates serial port 7 on M1 (/dev/ttyS7)

UART7 M1 pins: UART7_RX_M1, UART7_TX_M1

Usage: Add the item "rk3568-uart7-m1" to "overlays=" line in /boot/uEnv.txt.

overlays=rk3568-uart7-m1
rk3568-uart8-m1

Activates serial port 8 on M1 (/dev/ttyS8)

UART8 M1 pins: UART8_RX_M1, UART8_TX_M1

Usage: Add the item "rk3568-uart8-m1" to "overlays=" line in /boot/uEnv.txt.

overlays=rk3568-uart8-m1
rk3568-uart9-m1

Activates serial port 9 on M1 (/dev/ttyS9)

UART9 M1 pins: UART9_RX_M1, UART9_TX_M1

Usage: Add the item "rk3568-uart9-m1" to "overlays=" line in /boot/uEnv.txt.

overlays=rk3568-uart9-m1
rk3568-w1-gpio

Activates 1-Wire GPIO master

Requires an external pull-up resistor on the data pin

  • Parameters:
    • param_w1_pin (pin)
      • Data pin for 1-Wire master
      • Optional
      • Default: GPIO3_A5

Usage: Add the item "rk3568-w1-gpio" to "overlays=" line in /boot/uEnv.txt. Also param_w1_pin is needed.

overlays=rk3568-w1-gpio
param_w1_pin=GPIO3_A5