Please enable javascript, or click here to visit my ecommerce web site powered by Shopify.
Jump to: navigation, search

Difference between revisions of "Zero/install/eMMC erase"

< Zero‎ | install
 
(5 intermediate revisions by 2 users not shown)
Line 5: Line 5:
 
=== How to erase eMMC ===
 
=== How to erase eMMC ===
  
This guide describes how to erase Radxa Zero's eMMC.
+
This guide describes how to erase Radxa Zero series eMMC for installing a new system. Beware that this is not a secure erase, and only the bootloader and the partition header are wiped.
 +
 
 +
For more detailed guide on wiping eMMC (or if this fails), please refer to [[Zero/install/Boot_Troubleshooting | Boot Troubleshooting]] page.
  
 
== Requirement ==
 
== Requirement ==
  
* Radxa Zero
+
* Radxa Zero or Radxa Zero 2
 
* A PC/laptop running Windows, Linux, or macOS
 
* A PC/laptop running Windows, Linux, or macOS
 
* USB A to C cable or C to C cable, depending on your host
 
* USB A to C cable or C to C cable, depending on your host
  
== Windows ==
+
== How to ==
  
First, follow [[Zero/dev/maskrom#Enable_maskrom | maskrom guide]] to setup and load '''factory-loader.img''':
+
Follow [[Zero/dev/maskrom#Enable_maskrom | maskrom guide]] to setup and load [https://dl.radxa.com/zero/images/loader/radxa-zero-erase-emmc.bin radxa-zero-erase-emmc.bin] or [https://dl.radxa.com/zero2pro/images/loader/radxa-zero-2pro-erase-emmc.bin radxa-zero-2pro-erase-emmc.bin]:
  
 
[[File:Rz-usb-helper-fastboot.png | 500px]]
 
[[File:Rz-usb-helper-fastboot.png | 500px]]
  
You can then click '''Erase''' button to erase the eMMC.
+
Once your computer detects a new USB storage device, your eMMC will be wiped and you can flash to this newly found USB device.
 
+
[[File:Rz-usb-helper-erase.png | 500px]]
+
 
+
== Linux & macOS  ==
+
 
+
First, follow [[Zero/dev/maskrom#Enable_maskrom | maskrom guide]] to setup and load '''rz-fastboot-loader.bin'''.
+
 
+
You are now booted into fastboot mode. Check it by running '''lsusb''':
+
 
+
    Bus 001 Device 051: ID 18d1:0d02 Google Inc. Celkon A88
+
 
+
Now execute the following commands to wipe eMMC:
+
 
+
macOS:
+
fastboot erase 0
+
fastboot reboot
+
 
+
Linux:
+
sudo fastboot erase 0
+
sudo fastboot reboot
+
 
+
For more detailed guide on wiping eMMC, please refer to [[Zero/install/Boot_Troubleshooting | Boot Troubleshooting]] page.
+

Latest revision as of 07:43, 29 November 2023

    Radxa Zero >  Installation >  Erase eMMC

How to erase eMMC

This guide describes how to erase Radxa Zero series eMMC for installing a new system. Beware that this is not a secure erase, and only the bootloader and the partition header are wiped.

For more detailed guide on wiping eMMC (or if this fails), please refer to Boot Troubleshooting page.

Requirement

  • Radxa Zero or Radxa Zero 2
  • A PC/laptop running Windows, Linux, or macOS
  • USB A to C cable or C to C cable, depending on your host

How to

Follow maskrom guide to setup and load radxa-zero-erase-emmc.bin or radxa-zero-2pro-erase-emmc.bin:

Rz-usb-helper-fastboot.png

Once your computer detects a new USB storage device, your eMMC will be wiped and you can flash to this newly found USB device.