Difference between revisions of "Zero/install/eMMC erase"

Revision as of 02:45, 23 January 2022

English

    Radxa Zero >  Installation >  Erase eMMC

How to erase eMMC

This guide describes how to erase Radxa Zero series eMMC for installing a new system. Beware that this is not a secure erase, and only the bootloader and the partition header are wiped.

For more detailed guide on wiping eMMC, please refer to Boot Troubleshooting page.

Requirement

Radxa Zero or Radxa Zero 2
A PC/laptop running Windows, Linux, or macOS
USB A to C cable or C to C cable, depending on your host

How to

Follow maskrom guide to setup and load radxa-zero-erase-emmc.bin or radxa-zero2-erase-emmc.bin:

Once your computer detects a new USB storage device, your eMMC will be wiped and you can flash to this newly found USB device.

@@ Line 3: / Line 3: @@
      [[zero | Radxa Zero]] > [[zero/install | Installation]] > [[zero/install/eMMC_erase | Erase eMMC]]
-=== How to completely erase the Radxa Zero eMMC ===
+=== How to erase eMMC ===
-This guide describes how to completely erase Radxa Zero's eMMC. Unlike normal PC where they have a well established and documented way of booting, in embedded world it is a bit chaotic and everyone carries their own bootloader and boot sequence. As such it's best to wipe the eMMC completely and have a clean environment before flashing a new image to eMMC.
+This guide describes how to erase Radxa Zero series eMMC for installing a new system. Beware that this is not a secure erase, and only the bootloader and the partition header are wiped.
+For more detailed guide on wiping eMMC, please refer to [[Zero/install/Boot_Troubleshooting | Boot Troubleshooting]] page.
 == Requirement ==
-* Radxa Zero
+* Radxa Zero or Radxa Zero 2
 * A PC/laptop running Windows, Linux, or macOS
 * USB A to C cable or C to C cable, depending on your host
-== Windows ==
+== How to ==
-First, follow [[Zero/dev/maskrom#Enable_maskrom | maskrom guide]] to setup and load '''factory-loader.img''':
+Follow [[Zero/dev/maskrom#Enable_maskrom | maskrom guide]] to setup and load [https://dl.radxa.com/zero/images/loader/radxa-zero-erase-emmc.bin radxa-zero-erase-emmc.bin] or [https://dl.radxa.com/zero2/images/loader/radxa-zero2-erase-emmc.bin radxa-zero2-erase-emmc.bin]:
 [[File:Rz-usb-helper-fastboot.png | 500px]]
-You can then click '''Erase''' button to erase the eMMC.
+Once your computer detects a new USB storage device, your eMMC will be wiped and you can flash to this newly found USB device.
-[[File:Rz-usb-helper-erase.png | 500px]]
-== Linux & macOS  ==
-First, follow [[Zero/dev/maskrom#Enable_maskrom | maskrom guide]] to setup and load '''rz-fastboot-loader.bin'''.
-You are now booted into fastboot mode. Check it by running '''lsusb''':
- Bus 001 Device 076: ID '''18d1:0d02''' Google Inc. USB download gadget  Serial: 1234567890
-Now execute the following commands to wipe eMMC:
-macOS:
- fastboot flashing unlock_critical
- fastboot flashing unlock
- fastboot erase bootloader
- fastboot erase bootloader-boot0
- fastboot erase bootloader-boot1
- fastboot reboot
-Linux:
- sudo fastboot flashing unlock_critical
- sudo fastboot flashing unlock
- sudo fastboot erase bootloader
- sudo fastboot erase bootloader-boot0
- sudo fastboot erase bootloader-boot1
- sudo fastboot reboot