Please enable javascript, or click here to visit my ecommerce web site powered by Shopify.
Jump to: navigation, search

Difference between revisions of "Zero/install/eMMC erase"

< Zero‎ | install
Line 40: Line 40:
 
  sudo fastboot erase 0
 
  sudo fastboot erase 0
 
  sudo fastboot reboot
 
  sudo fastboot reboot
 +
 +
For more detailed guide on wiping eMMC, please refer to [[Zero/install/Boot_Troubleshooting | Boot Troubleshooting]] page.

Revision as of 09:30, 24 December 2021

    Radxa Zero >  Installation >  Erase eMMC

How to erase eMMC

This guide describes how to erase Radxa Zero's eMMC.

Requirement

  • Radxa Zero
  • A PC/laptop running Windows, Linux, or macOS
  • USB A to C cable or C to C cable, depending on your host

Windows

First, follow maskrom guide to setup and load factory-loader.img:

Rz-usb-helper-fastboot.png

You can then click Erase button to erase the eMMC.

Rz-usb-helper-erase.png

Linux & macOS

First, follow maskrom guide to setup and load rz-fastboot-loader.bin.

You are now booted into fastboot mode. Check it by running lsusb:

   Bus 001 Device 051: ID 18d1:0d02 Google Inc. Celkon A88

Now execute the following commands to wipe eMMC:

macOS:

fastboot erase 0
fastboot reboot

Linux:

sudo fastboot erase 0
sudo fastboot reboot

For more detailed guide on wiping eMMC, please refer to Boot Troubleshooting page.