Please enable javascript, or click here to visit my ecommerce web site powered by Shopify.
Jump to: navigation, search

Difference between revisions of "Zero/install/eMMC aml tool"

< Zero‎ | install
(execute command to flash)
(Run Radxa-Zero into maskrom mode)
Line 32: Line 32:
 
====Step2: Flash amlupdate_img====
 
====Step2: Flash amlupdate_img====
 
=====Run Radxa-Zero into maskrom mode=====
 
=====Run Radxa-Zero into maskrom mode=====
* Press and hold the button on the back side of Radxa-Zero before you plug in usb cable in the USB-PWR port.
+
* Press and hold the button on the back side of Radxa-Zero before you plugin usb cable in the USB-PWR port.
 
* If Radxa-Zero running in maskrom mode correctly, you will see following info when you execute lsusb command.
 
* If Radxa-Zero running in maskrom mode correctly, you will see following info when you execute lsusb command.
 
  $ lsusb
 
  $ lsusb
 
  Bus 001 Device 052: ID 1b8e:c003 Amlogic, Inc. USB DEVICE
 
  Bus 001 Device 052: ID 1b8e:c003 Amlogic, Inc. USB DEVICE
 +
 
=====execute command to flash=====
 
=====execute command to flash=====
 
  $ aml-flash-tool.sh path_to_amlupdate_img/img_file
 
  $ aml-flash-tool.sh path_to_amlupdate_img/img_file

Revision as of 01:43, 12 July 2021

 Zero >  Install >  Install on eMMC card(use aml tool)

Possible Issues

This aml-flash-tool.sh may not work very stably. If you seeing some log like:

[KO]

Cleanup

please try to run again.

Step1: Requirements

Host request: Ubuntu LTS version 14.04 and later, including 14.04/16.04/18.04/20.04.

Download and install aml-flash tool:

# git clone flash tool
git clone https://github.com/radxa/aml-flash-tool.git
# install dependency
cd aml-flash-tool
./INSTALL

Download image from amlupdate_img and extract.

Step2: Flash amlupdate_img

Run Radxa-Zero into maskrom mode
  • Press and hold the button on the back side of Radxa-Zero before you plugin usb cable in the USB-PWR port.
  • If Radxa-Zero running in maskrom mode correctly, you will see following info when you execute lsusb command.
$ lsusb
Bus 001 Device 052: ID 1b8e:c003 Amlogic, Inc. USB DEVICE
execute command to flash
$ aml-flash-tool.sh path_to_amlupdate_img/img_file