Please enable javascript, or click here to visit my ecommerce web site powered by Shopify.
Jump to: navigation, search

Difference between revisions of "Zero/install/eMMC"

< Zero‎ | install
 
(11 intermediate revisions by the same user not shown)
Line 1: Line 1:
 
{{zero_header}}
 
{{zero_header}}
 +
 
{{Languages|zero/install/eMMC}}
 
{{Languages|zero/install/eMMC}}
 +
 
     [[zero | Radxa Zero]] > [[zero/install | Installation]] > [[zero/install/eMMC | Install image to eMMC]]
 
     [[zero | Radxa Zero]] > [[zero/install | Installation]] > [[zero/install/eMMC | Install image to eMMC]]
  
=== How to install raw images to Radxa Zero eMMC ===
+
=== How to install Linux image to Radxa Zero eMMC ===
  
This guide describes how to install the raw images to Radxa Zero eMMC. Raw images is compared to amlupdate format image(which is a private image format). Raw images can be mount and open on host PCs. Most of the Linux images released are raw images. Android on the other hand contains images of its partitions, which result in many raw images that can't be flashed like Linux distro.
+
This guide describes how to install the raw images to Radxa Zero series eMMC. Raw image is the standard method to install Linux distro on single board computers, since they don't have standardized way to boot and initialize their hardware.
  
 
== Requirement ==
 
== Requirement ==
  
* Radxa Zero
+
* Radxa Zero or Radxa Zero 2
 
* A PC/laptop running Windows, Linux, or macOS
 
* A PC/laptop running Windows, Linux, or macOS
 
* USB A to C cable or C to C cable, depending on your host
 
* USB A to C cable or C to C cable, depending on your host
* A supported Linux image, or
+
* A supported Linux image
* [https://dl.radxa.com/zero/images/android/ Android 9 image], which should be unzipped after downloading, and you will find files like this in the folder:
+
    $ ls
+
    android-info.txt  dtbo.img      flash-all.sh  product.img  vbmeta.img
+
    boot.img          dt.img        logo.img      recovery.img  vendor.img
+
    bootloader.img    flash-all.bat  odm.img      system.img
+
<code>bootloader.img</code> will be needed later to run Zero in fastboot mode.
+
  
== Windows ==
+
== Install using Windows ==
  
===== Step 1: Wipe eMMC =====
+
If you have existing data that you want to keep, this is your last chance to do so. Please follow [[Zero/dev/maskrom#Enable_maskrom | maskrom guide]] to load <code>rz-udisk-loader.bin</code> and make backup accordingly.
  
Please follow [[Zero/install/eMMC_erase#Windows | this guide]] to wipe eMMC. Do not close RZ USB Boot Helper when you finish.
+
Now follow [[Zero/install/eMMC_erase | eMMC erase guide]] to wipe out the existing system. Your computer should detect a new storage device after the file is loaded.
  
===== Step 2A: Flash Linux images =====
+
You can now flash your Linux image using balenaEtcher similar to [[Zero/getting_started#Write_Image | flash microSD card]]. Choose the newly detected device in your target drive and proceed as normal.
  
First download the [https://dl.radxa.com/zero/images/loader/rz-udisk-loader.bin RZ USB disk loader], select <code>rz-udisk-loader.bin</code> in RZ USB Boot Helper, and click '''Run'''.
+
Once you are done flashing, unplug and replug Radxa Zero to quit maskrom mode and boot normally.
  
Your computer should detect a new storage device after the code is loaded.
+
== Install using Linux or macOS ==
  
You can now flash your Linux image using balenaEtcher similar to [[Zero/getting_started#Write_Image | flash microSD card]]. Except you don't have to insert a card this time. Choose the new device detected in Step 2 as your target drive and proceed as normal.
+
If you have existing data that you want to keep, this is your last chance to do so. Please follow [[Zero/dev/maskrom#Enable_maskrom | maskrom guide]] to load <code>rz-udisk-loader.bin</code> and make backup accordingly.
  
===== Step 2B: Flash Android 9 =====
+
Now follow [[Zero/install/eMMC_erase | eMMC erase guide]] to wipe out the existing system. Your computer should detect a new storage device after the file is loaded.
 
+
Select extracted <code>bootloader.img</code> in RZ USB Boot Helper, and click '''Run''' to run Radxa Zero in fastboot mode.
+
 
+
Then Open Windows PowerShell from the Start Menu and execute this command to install <code>fastboot</code> tool:
+
    iex ((New-Object System.Net.WebClient).DownloadString('https://raw.githubusercontent.com/corbindavenport/nexus-tools/master/install.ps1'))
+
 
+
Execute <code>flash-all.bat</code> from extracted Android 9 image folder to flash all partitions to eMMC.
+
 
+
If Zero did not reboot automatically after flashing, you should reconnect USB cable to reboot it.
+
 
+
== Linux & macOS ==
+
For Linux and macOS, we use amlogic boot tool to download the bootloader and boot the Zero into the USB Disk mode. This is to expose the eMMC to host PC as a USB Disk. Then we can use dd or other tools to write images to the USB Disk(eMMC).
+
 
+
===== Step 1: Wipe eMMC =====
+
 
+
Please follow [[https://wiki.radxa.com/Zero/install/eMMC_erase#Linux_.26_macOS | this guide]] to wipe eMMC. Depending on which image you want to flash, you may or may not power cycle your Radxa Zero in the end, so it is in the right mode for flashing.
+
 
+
===== Step 2A: Flash Linux images =====
+
 
+
Download the USB disk loader and run it on Zero
+
 
+
    wget https://dl.radxa.com/zero/images/loader/rz-udisk-loader.bin
+
    boot-g12.py rz-udisk-loader.bin
+
 
+
It should output:
+
<pre>
+
Firmware Version :
+
ROM: 3.2 Stage: 0.0
+
Need Password: 0 Password OK: 1
+
Writing rz-udisk-loader.bin at 0xfffa0000...
+
[DONE]
+
Running at 0xfffa0000...
+
[DONE]
+
AMLC dataSize=16384, offset=65536, seq=0...
+
[DONE]
+
AMLC dataSize=49152, offset=393216, seq=1...
+
[DONE]
+
AMLC dataSize=16384, offset=229376, seq=2...
+
[DONE]
+
AMLC dataSize=49152, offset=245760, seq=3...
+
[DONE]
+
AMLC dataSize=49152, offset=294912, seq=4...
+
[DONE]
+
AMLC dataSize=16384, offset=65536, seq=5...
+
[DONE]
+
AMLC dataSize=1406320, offset=81920, seq=6...
+
[DONE]
+
[BL2 END]
+
</pre>
+
  
 
Now lsusb should show the following device:
 
Now lsusb should show the following device:
  
     Bus 001 Device 082: ID 1b8e:2200 Amlogic, Inc. USB download gadget Serial: AMLG12A-RADXA-ZERO
+
     Bus 001 Device 049: ID 1b8e:2200 Amlogic, Inc. USB download gadget
  
 
The Zero is in USB disk mode now, your computer should popup a new USB drive. On macOS you will get a disk not readable popup. Just click Ignore:
 
The Zero is in USB disk mode now, your computer should popup a new USB drive. On macOS you will get a disk not readable popup. Just click Ignore:
Line 126: Line 73:
 
     sync
 
     sync
  
Carefully Eject the Zero USB drive and unplug and plug the power, Zero should boot the new image now.
+
Once you are done flashing, unplug and replug Radxa Zero to quit maskrom mode and boot normally.
 
+
===== Step 2B: Flash Android 9 =====
+
 
+
Nexus Tools is an installer for the Android SDK Platform Tools package, which includes ADB, Fastboot, and other applications. We use Nexus Tools to install fastboot. If you already have fastboot installed, you can skip this step.
+
 
+
    bash <(curl -s https://raw.githubusercontent.com/corbindavenport/nexus-tools/master/install.sh)
+
 
+
After it finishes, <code>which fastboot</code> should return you the install location.
+
 
+
Now execute <code>flash-all.sh</code> from your extracted Android folder to flash all partitions images to eMMC
+
 
+
    $ ./flash-all.sh
+
    error: no devices/emulators found
+
    OKAY [  0.040s]
+
    Finished. Total time: 0.040s
+
    OKAY [  0.039s]
+
    Finished. Total time: 0.039s
+
    ...
+
    Finished. Total time: 0.038s
+
    Rebooting                                          OKAY [  0.002s]
+
    Finished. Total time: 0.454s
+
 
+
If Zero did not reboot automatically after flashing, you should reconnect USB cable to reboot it.
+

Latest revision as of 02:49, 23 January 2022

    Radxa Zero >  Installation >  Install image to eMMC

How to install Linux image to Radxa Zero eMMC

This guide describes how to install the raw images to Radxa Zero series eMMC. Raw image is the standard method to install Linux distro on single board computers, since they don't have standardized way to boot and initialize their hardware.

Requirement

  • Radxa Zero or Radxa Zero 2
  • A PC/laptop running Windows, Linux, or macOS
  • USB A to C cable or C to C cable, depending on your host
  • A supported Linux image

Install using Windows

If you have existing data that you want to keep, this is your last chance to do so. Please follow maskrom guide to load rz-udisk-loader.bin and make backup accordingly.

Now follow eMMC erase guide to wipe out the existing system. Your computer should detect a new storage device after the file is loaded.

You can now flash your Linux image using balenaEtcher similar to flash microSD card. Choose the newly detected device in your target drive and proceed as normal.

Once you are done flashing, unplug and replug Radxa Zero to quit maskrom mode and boot normally.

Install using Linux or macOS

If you have existing data that you want to keep, this is your last chance to do so. Please follow maskrom guide to load rz-udisk-loader.bin and make backup accordingly.

Now follow eMMC erase guide to wipe out the existing system. Your computer should detect a new storage device after the file is loaded.

Now lsusb should show the following device:

   Bus 001 Device 049: ID 1b8e:2200 Amlogic, Inc. USB download gadget

The Zero is in USB disk mode now, your computer should popup a new USB drive. On macOS you will get a disk not readable popup. Just click Ignore:

Rz-udisk-mac-popup.jpg

On Linux you will get following output from sudo dmesg:

[74292.229573] usb 1-10.2.3: new high-speed USB device number 84 using xhci_hcd
[74292.330483] usb 1-10.2.3: New USB device found, idVendor=1b8e, idProduct=c003, bcdDevice= 0.20
[74292.330487] usb 1-10.2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[74292.330488] usb 1-10.2.3: Product: GX-CHIP
[74292.330489] usb 1-10.2.3: Manufacturer: Amlogic
[74303.432510] usb 1-10.2.3: USB disconnect, device number 84
[74303.665204] usb 1-10.2.3: new high-speed USB device number 85 using xhci_hcd
[74303.769674] usb 1-10.2.3: New USB device found, idVendor=1b8e, idProduct=2200, bcdDevice=99.99
[74303.769678] usb 1-10.2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[74303.769679] usb 1-10.2.3: Product: USB download gadget
[74303.769680] usb 1-10.2.3: Manufacturer: Radxa
[74303.769681] usb 1-10.2.3: SerialNumber: AMLG12A-RADXA-ZERO
[74303.771008] usb-storage 1-10.2.3:1.0: USB Mass Storage device detected
[74303.771133] scsi host4: usb-storage 1-10.2.3:1.0
[74304.785353] scsi 4:0:0:0: Direct-Access     Linux    Radxa Zero UDisk  0ff PQ: 0 ANSI: 2
[74304.785506] sd 4:0:0:0: Attached scsi generic sg2 type 0
[74304.785679] sd 4:0:0:0: [sdc] 60749504 512-byte logical blocks: (31.1 GB/29.0 GiB)
[74304.785796] sd 4:0:0:0: [sdc] Write Protect is off
[74304.785798] sd 4:0:0:0: [sdc] Mode Sense: 0f 00 00 00
[74304.785916] sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[74304.833523]  sdc: sdc1
[74304.861751] sd 4:0:0:0: [sdc] Attached SCSI removable disk
[74305.424709] EXT4-fs (sdc1): recovery complete
[74305.425517] EXT4-fs (sdc1): mounted filesystem with writeback data mode. Opts: (null). Quota mode: none.

You can now use dd to write the raw image to the eMMC on Zero now.

   sudo dd if=/path/to/image of=/dev/new_dev bs=1M
   sync

Once you are done flashing, unplug and replug Radxa Zero to quit maskrom mode and boot normally.