Please enable javascript, or click here to visit my ecommerce web site powered by Shopify.
Jump to: navigation, search

RockpiX/install/eMMC

< RockpiX‎ | install
Revision as of 13:20, 20 August 2020 by Shine (Talk | contribs)

    ROCK Pi X >  Install >  Install OS to eMMC


How to Install the OS to eMMC

We know that the chip used by RockpiX is of x86 architecture, so we can not only run linux on RockpiX, but also run windows operating system.You know, the installation system requires a boot disk, which can be a U disk or a mobile hard disk. The raw material for making this boot disk is the iso file, we need to use the iso file to make a storage device such as a USB disk or a mobile hard disk into a boot disk. Then insert the boot disk into the usb port of RockpiX. After power on, the BIOS on RockpiX will recognize the boot disk. We only need to select the corresponding boot item in the BIOS to enter the boot disk to install the system.

Below I will separately explain how to use iso files to make boot disks in macOS, linux and windows systems.

macOS Host

Make an iso bootable USB stick

Windows Host

Make an iso bootable USB stick

Use rufus to make a boot disk:

1. Install and open Rufus(Github).

2. Choose your u disk or mobile hard disk:

Rufus1.png

3. Choose your iso file

Rufus2.png

Rufus3.png

4. Select GPT type

Rufus4.png

5. Click the START button to start making the boot disk

Rufus5.png

Rufus6.png

6. Wait for the production to complete

Rufus7.png

7. Click CLOSE when finished

Rufus8.png

Linux Host

Make an iso bootable USB stick

  • Make Linux boot disk:

Use the dd command

$ sudo dd if=ubuntu.iso of=/dev/xxx bs=8M status=progress
  • Make Windows boot disk:

Use woeusb commands

$ sudo apt-get install woeusb
$ sudo woeusb --device windows.iso /dev/sdX

System installation guide

Plug in the boot disk, power on Rockpix and enter the BIOS, select your boot disk to boot from the boot options.

Install ubuntu BIOS.png

windows installation guide

After startup, follow the installation guide to complete the system installation, as shown in the following figure:

Install windows1.png

Linux installation guide

After startup, follow the installation guide to complete the system installation, as shown in the following figure:

Install ubuntu boot.png

Install ubuntu interface.png