Please enable javascript, or click here to visit my ecommerce web site powered by Shopify.
Jump to: navigation, search

RockpiX/getting started

    ROCK Pi X >  Getting started


This guide is designed for ROCK Pi X enthusiast. The purpose is to learn about the ROCK Pi X board as well as how to prepare and set up for basic use. The ROCK Pi X comes in two models, Model A and Model B. When you get a board, you need to know what Pi model it is and which hardware version it is. The information is printed in the top side of the board. We will introduce the board information as much as possible.

What you need

Necessary

  • ROCK Pi X main board
    • ROCK Pi X Model A or Model B
  • Power supply
    • The ROCK Pi X is powered by Type-C port and has a wide range of input voltage, from 9V to 21V. The Pi supports USB Type-C PD 2.0 with 9V/2A, 12V/2A, 15V/2A and 20V/2A. Besides, the Pi supports QC 3.0/2.0 with 9V/2A and 12V/1.5A.
    • The Type-C cable you using needs to support data communication. We call it USB Type-C charging data cable.
  • USB Keyboard and Mouse
    • With four USB-A connectors, ROCK Pi X can be equipped with a full sized keyboard and mouse.
  • Monitor and HDMI Cable
    • ROCK Pi X is equipped with a full sized HDMI connector. HDMI capable monitor is recommended.
    • HDMI EDID display data is used to determine the best display resolution. On monitors and TVs that support 1080p (or 4K) this resolution will be selected. If 1080p is not supported the next available resolution reported by EDID will be used. This selected mode will work with MOST but not all monitors/TVs.


Features

Model ROCK PI X Model A ROCK PI X Model B
Processor 64bits Quad Core X86 Processor
Intel Atom x5-Z8300 Cherry Trail
Quad-core processor @ 1.44 GHz / 1.84 GHz (Turbo)
Intel Gen8 HD graphics @ 500 MHz
Memory LPDDR3
64bit dual channel LPDDR3@1866Mb/s, 1GB/2GB/4GB optional
Storage eMMC module (Optional industrial compatible high performance eMMC module, 16GB/32GB/64GB/128GB available)
μSD card (μSD slot supports up to 128 GB μSD card)
Display HDMI 2.0 up to 4k@30
Audio 3.5mm jack with mic
HD codec that supports up to 24-bit/96KHz audio.
Wireless None 802.11 ac wifi
Bluetooth 4.2
with on board antenna and external antenna support.
USB USB 3.0 OTG X1, hardware switch for host/device switch, lower one
USB 2.0 HOST X3
Ethernet GbE LAN GbE LAN with Power over Ethernet (PoE) support
additional HAT is required for powering from PoE
IO 40-pin expansion header
2 x UART
2 x SPI bus
2 x I2C bus
1 x PCM/I2S
1 x SPDIF
2 x PWM
1 x ADC
6 x GPIO
2 x 5V DC power in
2 x 3.3V DC power in
Others RTC
RTC battery connector for time backup(optional)
Power USB PD, support USB Type C PD 2.0, 9V/2A, 12V/2A, 15V/2A, 20V/2A.
Qualcomm® Quick ChargeTM: Supports QC 3.0/2.0 adapter, 9V/2A, 12V/1.5A
Size 85mm x 54mm

Starting the board for the first time

Prepare

Power Button

  • - Short press the power button to turn off the screen/lock the device
  • - Long press the power button(~3s) to shutdown the device
  • - Long press the power button for more than 10s to force reboot the ROCK Pi X

LED

  • - Power LED(Green): indicate the power for the device
  • - Status LED(Blue): indicate the BIOS or OS running status, which the Blue LED is on, the BIOS is running, when the OS is running the Blue LED is off. When the OS is shutdown, the Blue LED is on again.

BIOS Introduction

OS Install

Power off