Please enable javascript, or click here to visit my ecommerce web site powered by Shopify.
Jump to: navigation, search

Difference between revisions of "RockpiS/network-management"

(Created page with "{{rockpiS_header}} {{Languages|rockpiS/dev/usbnet}} ROCK Pi S > ROCK Pi S Network Management This guide describes how to...")
 
Line 8: Line 8:
  
 
=== Introduction ===
 
=== Introduction ===
 +
Rockpis static address settings.First, install some dependency packages
 +
    sudo apt-get install netplan.io
 +
Create the'''01-netcfg.yaml''' file in the folder /etc/netplan.If there is no netplan folder, you need to create.
 +
    sudo mkdir /etc/netplan
 +
    sudo touch /etc/netplan/01-netcfg.yaml
 +
Add the following to the file '''01-netcfg.yaml'''
 +
  rock@rockpis:/etc/netplan$ cat 01-netcfg.yaml 
 +
    network:
 +
  version: 2
 +
  renderer: networkd
 +
  ethernets:
 +
    eth0:
 +
      addresses:
 +
        - 192.168.2.135/24
 +
      gateway4: 192.168.2.1
 +
      nameservers:
 +
          search: [mydomain, otherdomain]
 +
          addresses: [192.168.2.1, 255.255.255.0]
  
 +
Execute the following command for the configuration to take effect
 +
    sudo netplan apply
 +
then reboot,IP address is what you set.
  
  

Revision as of 07:53, 7 May 2020

    ROCK Pi S >  ROCK Pi S Network Management

This guide describes how to manage the network on ROCK Pi S.

Introduction

Rockpis static address settings.First, install some dependency packages

   sudo apt-get install netplan.io

Create the01-netcfg.yaml file in the folder /etc/netplan.If there is no netplan folder, you need to create.

   sudo mkdir /etc/netplan
   sudo touch /etc/netplan/01-netcfg.yaml

Add the following to the file 01-netcfg.yaml

  rock@rockpis:/etc/netplan$ cat 01-netcfg.yaml  
   network:
 version: 2
 renderer: networkd
 ethernets:
   eth0:
     addresses:
       - 192.168.2.135/24
     gateway4: 192.168.2.1
     nameservers:
         search: [mydomain, otherdomain]
         addresses: [192.168.2.1, 255.255.255.0]

Execute the following command for the configuration to take effect

   sudo netplan apply

then reboot,IP address is what you set.


Troubleshooting