Please enable javascript, or click here to visit my ecommerce web site powered by Shopify.
Jump to: navigation, search

Difference between revisions of "RockpiS/hardware/revisions"

Line 20: Line 20:
  
 
===V1.2===
 
===V1.2===
* Add full PDM support on GPIO header according the discussion on the forum
+
* Add full PDM support on GPIO header according to the [https://forum.radxa.com/t/audio-support-rock-pi-s/1686/12 discussion on the forum]
 
* Swap ethernet status led JP1 pin 11/12 and pin 13/14
 
* Swap ethernet status led JP1 pin 11/12 and pin 13/14
 
* Change resistor R9608 R90304 value to reduce brightness of LED
 
* Change resistor R9608 R90304 value to reduce brightness of LED
 
* Add 5.1K pull down resistor on type C CC pin :-)
 
* Add 5.1K pull down resistor on type C CC pin :-)

Revision as of 07:27, 17 October 2019


    ROCK Pi S >  Hardware >  Hardware Revisions


This page describe the hardware revisions of ROCK Pi S. For the different models and features of each models, please refer models page.

V1.0

  • This is the first version of the board, 15 samples are made

V1.1

  • Board color changes to yellow :-)
  • Change GPIO header to be compatible with ROCK Pi 4
  • Swap USB Host on type A and USB OTG on type C, make more sense with single cable for power and adb
  • Change SPI flash to SD Nand

V1.2

  • Add full PDM support on GPIO header according to the discussion on the forum
  • Swap ethernet status led JP1 pin 11/12 and pin 13/14
  • Change resistor R9608 R90304 value to reduce brightness of LED
  • Add 5.1K pull down resistor on type C CC pin :-)