Please enable javascript, or click here to visit my ecommerce web site powered by Shopify.
Jump to: navigation, search

Difference between revisions of "RockpiS/hardware/revisions"

(Created page with "This page describe the hardware revisions of ROCK Pi S. For the different models and features of each models, please refer models page. === V1.0 === * This is the first vers...")
 
Line 1: Line 1:
 +
{{rockpiS_header}}
 +
{{Languages|rockpiS/hardware/revisions}}
 +
 +
__NOTOC__
 +
 +
    [[rockpiS | ROCK Pi S]] > [[rockpiS/hardware | Hardware]] > [[rockpiS/hardware/revisions | Hardware Revisions]]
 +
 +
 
This page describe the hardware revisions of ROCK Pi S. For the different models and features of each models, please refer models page.
 
This page describe the hardware revisions of ROCK Pi S. For the different models and features of each models, please refer models page.
  
 
=== V1.0 ===
 
=== V1.0 ===
  
* This is the first version of the board, 11 samples are made
+
* This is the first version of the board, 15 samples are made
  
 
=== V1.1===
 
=== V1.1===

Revision as of 06:34, 17 October 2019


    ROCK Pi S >  Hardware >  Hardware Revisions


This page describe the hardware revisions of ROCK Pi S. For the different models and features of each models, please refer models page.

V1.0

  • This is the first version of the board, 15 samples are made

V1.1

  • Board color changes to yellow :-)
  • Change GPIO header to be compatible with ROCK Pi 4
  • Swap USB Host on type A and USB OTG on type C, make more sense with single cable for power and adb
  • Change SPI flash to SD Nand

V1.2

  • Add full PDM support on GPIO header according the discussion on the forum
  • Swap ethernet status led JP1 pin 11/12 and pin 13/14
  • Change resistor R9608 R90304 value to reduce brightness of LED
  • Add 5.1K pull down resistor on type C CC pin :-)