Please enable javascript, or click here to visit my ecommerce web site powered by Shopify.
Jump to: navigation, search

Difference between revisions of "RockpiS/getting started/troubleshooting"

(Using SSH)
(Check the serial console)
Line 6: Line 6:
 
=== Check the serial console ===
 
=== Check the serial console ===
  
By default, the ROCK Pi S uses the colorful 26PIN GPIO header PIN19 and PIN21.
+
1. By default, the ROCK Pi S uses the colorful 26PIN GPIO header PIN19 and PIN21.
 +
 
 +
2. The USB to TTL chip must support 1.5Mbps baud rate, some cheap USB to TTL chip can not support such high baud rate.
  
 
=== Default non-root user  ===
 
=== Default non-root user  ===

Revision as of 04:53, 11 November 2019

    ROCK Pi S >  Getting Started >  Troubleshooting

Check the serial console

1. By default, the ROCK Pi S uses the colorful 26PIN GPIO header PIN19 and PIN21.

2. The USB to TTL chip must support 1.5Mbps baud rate, some cheap USB to TTL chip can not support such high baud rate.

Default non-root user

 user: rock
 password: rock

Using SSH

Package ssh is pre-installed on ROCK Pi S system image.

To access ROCK Pi S by SSH, try

 ping ip-of-device
 ssh rock@ip-of-device

or

 ping rockpis.local
 ssh rock@rockpis.local