Please enable javascript, or click here to visit my ecommerce web site powered by Shopify.
Jump to: navigation, search

RockpiN10/hardware/rockpiN10

< RockpiN10‎ | hardware
Revision as of 11:52, 10 December 2019 by Stephen (Talk | contribs)


    ROCK Pi N10 >  Hardware >  Main Board
ROCKPI N10 Ports 03.png
ROCKPI N10 Ports 04.png
ROCKPI N10 Ports 01.png
ROCKPI N10 Ports 02.png

SOM

Buttons

The ROCK Pi N10 board presents three buttons. They are Reset key, Maskrom key and Power key.

The Reset button serves as the hardware reset button. Short press and release the button, the system will be rebooted.

The Maskrom Button is for firmware flash/upgrade.

eDP Interface

eDP is the display interface. The definition table of the eDP connector is shown below.

As you can see, four lanes are layout.

Pin# Name Pin# Name
1 EDP_TX0P 2 EDP_TX0N
3 GND 4 GND
5 EDP_TX1P 6 EDP_TX1N
7 GND 8 GND
9 EDP_TX2P 10 EDP_TX2N
11 GND 12 GND
13 EDP_TX3P 14 EDP_TX3N
15 GND 16 GND
17 EDP_AUXP 18 EDP_AUXN
19 VDD 20 GND

Ethernet

The Giga Bit Ethernet LAN with Power over Ethernet (PoE) is provided. If you are interested in POE (Power Over Ethernet), you should try it on the ROCK Pi N10 board. Additional HAT is required for powering from PoE.

HDMI

The ROCK Pi N10 is equipped with one HDMI connector and one MIPI DSI. As for HDMI, the maximum resolution is 4k@60Hz. Any HDMI monitor should work as a display for the ROCK Pi N10. As for MIPI DSI, it is designed for raw LCD pannel. HDMI and MIPI DSI can work at the same time.

The HDMI interface pin specification shows below.

Pin# Name
1 HDMI_TX2P
2 GND
3 HDMI_TX2N
4 HDMI_TX1P
5 GND
6 HDMI_TX1N
7 HDMI_TX0P
8 GND
9 HDMI_TX0N
10 HDMI_TXCP
11 GND
12 HDMI_TXCN
13 HDMI_CEC
14 NC
15 DDC_SCL
16 DDC_SDA
17 GND
18 VCC5V0_HDMI
19 PORT_HPD

IR

LEDs

MIC

MIPI Camera Interface

There is a wide range of camera applications in our lives. MIPI CSI 2 lane on board support 800 MP camera via FPC connector.

The MIPI CSI interface pin specification shows below.

Pin# Name
1 VCC_CAM
2 I2C4_SDA
3 I2C4_SCL
4 CAM_MCLK
5 CAM_GPIO1
6 GND
7 MIPI_RX0_CLKP
8 MIPI_RX0_CLKN
9 GND
10 MIPI_RX0_D1P
11 MIPI_RX0_D1N
12 GND
13 MIPI_RX0_D0P
14 MIPI_RX0_D0P

MIPI Display Interface

The ROCK Pi N10 is equipped with one HDMI connector and one MIPI DSI. As for HDMI, the maximum resolution is 4k@60Hz. Any HDMI monitor should work as a display for the ROCK Pi N10. As for MIPI DSI, it is designed for raw LCD pannel. HDMI and MIPI DSI can work at the same time.

The MIPI DSI interface pin specification shows below.

Pin# Name
1 VCC_MIPI
2 VCC_MIPI
3 GND
4 I2C_SDA_AUDIO
5 I2C_SCL_AUDIO
6 GND
7 MIPI_TX/RX_D0P
8 MIPI_TX_RX_D0N
9 GND
10 MIPI_TX/RX_CLKP
11 MIPI_TX_RX_CLKN
12 GND
13 MIPI_TX/RX_D1P
14 MIPI_TX/RX_D1N
15 GND

M.2 Wireless

PCIE M.2 MGFF M-KEY SOCKET Interface

On ROCK Pi N10, M.2 connector supports up to 2T M2 NVME SSD.

The PCIE M.2 interface pin specification shows below.

Name Pin# Pin# Name
GND 1 2 +3.3V
GND 3 4 +3.3V
PERn3 5 6 NC
PERp3 7 8 NC
GND 9 10 DAS/DSS#
PETn3 11 12 +3.3V
PETp3 13 14 +3.3V
GND 15 16 +3.3V
PERn2 17 18 +3.3V
PERp2 19 20 EMMC_CMD
GND 21 22 NC
PETn2 23 24 NC
PETp2 25 26 NC
GND 27 28 NC
PERn1 29 30 NC
PERp1 31 32 NC
GND 33 34 NC
PETn1 35 36 NC
PETp1 37 38 DEVSLP
GND 39 40 NC
PERn0/SATA-B- 41 42 NC
PERp0/SATA-B+ 43 44 NC
GND 45 46 NC
PETn0/SATA-A- 47 48 NC
PETp0/SATA-A+ 49 50 PERST#
GND 51 52 CLKREQ#
REFCLKN 53 54 PEWake#
REFCLKP 55 56 NC
GND 57 58 NC
NC 67 68 SUSCLK
PEDET 69 70 +3.3V
GND 71 72 +3.3V
GND 73 74 +3.3V
GND 75

PoE

Power Supply

RTC

The RTC connector is designed according to the standard connector type.

Pin# Name
1 GND
2 +3.3V

SPI Nor Flash

One SPI Nor Flash is on board. Its power supply voltage is 1.8V.

TF Card Interface

The TF card can be used as a system storage or an external storage. When it's used as a system storage, you had better choose the ones with storage space larger than 8GB. When it's used as an external storage, you can choose the ones with storage space up to 128GB. When the TF card is inserted into the TF card slot , the device will be automatically recognized by the system.

The TF card interface pin specification shows below.

Pin# Name
1 SDMMC0_D2
2 SDMMC0_D3
3 SDMMC0_CMD
4 VCC3V3_SYS
5 SDMMC0_CLK
6 GND
7 SDMMC0_D0
8 SDMMC0_D1
9 SDMMC0_DET_L
10 GND
11 GND
12 GND
13 GND


USB

OTG Switch


General purpose input-output (GPIO) connector

ROCK Pi N10 has a 40-pin expansion header. Each pin is distinguished by color.