Please enable javascript, or click here to visit my ecommerce web site powered by Shopify.
Jump to: navigation, search

RockpiE/hardware/rockpiE

< RockpiE‎ | hardware
Revision as of 02:56, 20 November 2019 by Stephen (Talk | contribs)

    ROCK Pi E >  Hardware >  Main Board


Processor

Networking

Peripherals

TF Card Interface

The TF card can be used as a system storage or an external storage. When it's used as a system storage, you had better choose the ones with storage space larger than 8GB. When it's used as an external storage, you can choose the ones with storage space up to 128GB. When the TF card is inserted into the TF card slot , the device will be automatically recognized by the system.

The TF card interface pin specification shows below.

Pin# Name
1 SDMMC0_D2
2 SDMMC0_D3
3 SDMMC0_CMD
4 VCC3V3_SYS
5 SDMMC0_CLK
6 GND
7 SDMMC0_D0
8 SDMMC0_D1
9 SDMMC0_DET_L
10 GND
11 GND
12 GND
13 GND

Buttons

General purpose input-output (GPIO) connector

ROCK Pi E has one 40-pin expansion header. Each pin is distinguished by color.

Hardware V10

40-pin Header

GPIO number Func4 Func3 Func2 Func1 Pin# Pin# Func1 Func2 Func3 Func4 GPIO number
+3.3V 1 2 +5.0V
68 I2C1_SDA GPIO2_A4 3 4 +5.0V
69 I2C1_SCL GPIO2_A5 5 6 GND
100 UART1_TX SDMMC0EXT_D0 TSP_D0 GPIO3_A4 7 8 GPIO2_A0 UART2_TX_M1 POWERSTATE0 64
GND 9 10 GPIO2_A1 UART2_RX_M1 POWERSTATE1 65
96 SPI_CLK_M2 SDMMC0EXT_CMD TSP_VALID GPIO3_A0 11 12 GPIO2_D2 90
104 SPI_CSN0_M2 TSP_D4 GPIO3_B0 13 14 GND
98 SPI_RXD_M2 SDMMC0EXT_CLK TSP_CLK GPIO3_A2 15 16 USB20DM
+3.3V 17 18 USB20DP
27 SPDIF_TX_M0 GPIO0_D3 19 20 GND
83 CARD_CLK_M1 PDM_SDI0_M0 I2S1_SDI GPIO2_C3 21 22 GPIO2_B4 SPI_CSN1_M0 FLASH_VOL_SEL 76
60 CLK32KOUT_M1 GPIO1_D4 23 24 GPIO2_A3 EFUSE_PWREN POWERSTATE3 67
GND 25 26 GPIO2_C7 I2S1_SDO PDM_FSYNC_M0 87
97 SPI_TXD_M2 SDMMC0EXT_DET TSP_FAIL GPIO3_A1 27 28 GPIO2_C1 I2S1_LRCK_TX SPDIF_TX_M1 TSP_D6_M1 81
80 TSP_D5_M1 I2S1_LRCK_RX GPIO2_C0 29 30 GND
79 TSP_SYNC_M1 I2S1_MCLK GPIO2_B7 31 32 GPIO3_A6 TSP_D2 SDMMC0EXT_D2 UART1_RX 102
82 TSP_D7_M1 PDM_CLK_M0 I2S1_SCLK GPIO2_C2 33 34 GND
ADC_IN1 35 36 GPIO2_C5 I2S1_SDIO2 PDM_SDI2_M0 CARD_DET_M1 85
66 POWERSTATE2 IR_RX GPIO2_A2 39 38 GPIO2_C4 2S1_SDIO1 PDM_SDI1_M0 CARD_RST_M1 84
GND 39 40 GPIO2_C6 I2S1_SDIO3 PDM_SDI3_M0 CARD_IO_M1 86

More details about 40-pin Header

  • Pin#12(GPIO2_D2) is also the sleep pin of PMIC RK805. Be careful when you try to control it.
  • Pin#3 and Pin#5 are only for I2C communication.
  • Pins marked with color orange are designed for debug console.
  • SPI: x1
  • I2C: x1, I2C1
  • UART: x1, UART1 and UART2
  • USB: USB20DM(Pin#16) and USB20DP(Pin#18)
  • PDM: x1
  • I2S: x1, I2S1