Please enable javascript, or click here to visit my ecommerce web site powered by Shopify.
Jump to: navigation, search

Difference between revisions of "RockpiE/hardware/rockpiE"

(Power supply)
(Power supply)
Line 20: Line 20:
 
If you want to power ROCK Pi E standalone, you can use 5V/2A power adapter with USB Type-C ports. You can also use the USB PD/QC power adapter without worrying damage the board because the PD/QC adapter will detect ROCK Pi S only supports 5V so the adapter will output 5V.
 
If you want to power ROCK Pi E standalone, you can use 5V/2A power adapter with USB Type-C ports. You can also use the USB PD/QC power adapter without worrying damage the board because the PD/QC adapter will detect ROCK Pi S only supports 5V so the adapter will output 5V.
  
When you use PoE function provided by ROCK Pi E, you may power ROCK Pi E by putting DV +5V directly to PIN#2 of 26-PIN HEADER 1. GND pin like PIN#9 is also necessary.
+
When you use PoE function provided by ROCK Pi E, you may power ROCK Pi E by putting DV +5V directly to PIN#2 of 26-PIN HEADER. GND pin like PIN#9 is also necessary.
  
 
=== Processor ===
 
=== Processor ===

Revision as of 06:54, 11 April 2020

    ROCK Pi E >  Hardware >  Main Board

This hardware user manual provides information about the features and signals available on ROCK Pi E board.

Hardware version

ROCK Pi E board comes with different versions. When you get the board, you need to know the hardware version like 'ROCK Pi E V11', which is printed in the top side of the board.

Also, you need to know the ROCK Pi E Models and SKU, like 'ROCK Pi E D16W2P'.

Power supply

ROCK Pi E uses the USB Type-C port for power supply.

If you want to power ROCK Pi E standalone, you can use 5V/2A power adapter with USB Type-C ports. You can also use the USB PD/QC power adapter without worrying damage the board because the PD/QC adapter will detect ROCK Pi S only supports 5V so the adapter will output 5V.

When you use PoE function provided by ROCK Pi E, you may power ROCK Pi E by putting DV +5V directly to PIN#2 of 26-PIN HEADER. GND pin like PIN#9 is also necessary.

Processor

The Rockchip RK3328 Soc used in ROCK Pi E is a high-performance Quad-core Cortex-A53 application processor. It has Neon and FPU coprocessor, shared L2 cache, GPU and so on.

RK3328 Soc can run at 1.3 GHz CPU clock speed.

Networking

On the ROCK Pi E board, the 100M and Gigabit Ethernet port are provided.

For Giga Bit Ethernet, from the test result, we know that the bandwidth is at least 794Mbits/sec. If you are interested in POE (Power Over Ethernet), you should try it on the ROCK Pi E board.

The ROCK Pi E also support WiFi as well as Bluetooth.

Peripherals

The ROCK Pi E has one USB3.0 Type-A connectors.

The ROCK Pi E may be operated with any generic USB computer keyboard and mouse. It may also be used with USB storage, USB to MIDI converters, and virtually any other device/component with USB capabilities.

The ROCK Pi E is equipped with a standard 3.5mm jack. An audio lead is necessary to produce sound. Audio can be played through speakers or headphones using jack.

TF Card Interface

The TF card can be used as a system storage or an external storage. When it's used as a system storage, you had better choose the ones with storage space larger than 8GB. When it's used as an external storage, you can choose the ones with storage space up to 128GB. When the TF card is inserted into the TF card slot , the device will be automatically recognized by the system.

The TF card interface pin specification shows below.

Pin# Name
1 SDMMC0_D2
2 SDMMC0_D3
3 SDMMC0_CMD
4 VCC3V3_SYS
5 SDMMC0_CLK
6 GND
7 SDMMC0_D0
8 SDMMC0_D1
9 SDMMC0_DET_L
10 GND
11 GND
12 GND
13 GND


eMMC Socket on Board Interface Feature

The high performance eMMC module is the best choice as the system storage for ROCK Pi E. The eMMC module with 8GB/16GB/32GB/64GB/128GB is available.

The eMMC Socket pin specification shows below.

Name Pin# Pin# Name
GND 1 34 GND
EMMC_D5 2 33 EMMC_D6
GND 3 32 GND
EMMC_D4 4 31 EMMC_D7
GND 5 30 GND
EMMC_D0 6 29 EMMC_D1
GND 7 28 GND
EMMC_CLK 8 27 EMMC_D2
GND 9 26 GND
EMMC_D3 10 25 EMMC_CMD
GND 11 24 GND
EMMC_RSTN 12 23 VCC3V3_SYS
GND 13 22 VCC3V3_SYS
GND 14 21 VCC_1V8
EMMC_RCLK 15 20 VCC_1V8
GND 16 19 GND
GND 17 18 GND

Buttons

General purpose input-output (GPIO) connector

ROCK Pi E has one 40-pin expansion header. Each pin is distinguished by color.

Hardware V10

40-pin Header

GPIO number Func4 Func3 Func2 Func1 Pin# Pin# Func1 Func2 Func3 Func4 GPIO number
+3.3V 1 2 +5.0V
68 I2C1_SDA GPIO2_A4 3 4 +5.0V
69 I2C1_SCL GPIO2_A5 5 6 GND
100 UART1_TX SDMMC0EXT_D0 TSP_D0 GPIO3_A4 7 8 GPIO2_A0 UART2_TX_M1 64
GND 9 10 GPIO2_A1 UART2_RX_M1 65
96 SPI_CLK_M2 SDMMC0EXT_CMD TSP_VALID GPIO3_A0 11 12 GPIO2_D2 90
104 SPI_CSN0_M2 TSP_D4 GPIO3_B0 13 14 GND
98 SPI_RXD_M2 SDMMC0EXT_CLK TSP_CLK GPIO3_A2 15 16 USB20DM
+3.3V 17 18 USB20DP
27 SPDIF_TX_M0 GPIO0_D3 19 20 GND
83 CARD_CLK_M1 PDM_SDI0_M0 I2S1_SDI GPIO2_C3 21 22 GPIO2_B4 SPI_CSN1_M0 76
60 CLK32KOUT_M1 GPIO1_D4 23 24 GPIO2_A3 EFUSE_PWREN 67
GND 25 26 GPIO2_C7 I2S1_SDO PDM_FSYNC_M0 87
97 SPI_TXD_M2 SDMMC0EXT_DET TSP_FAIL GPIO3_A1 27 28 GPIO2_C1 I2S1_LRCK_TX SPDIF_TX_M1 TSP_D6_M1 81
80 TSP_D5_M1 I2S1_LRCK_RX GPIO2_C0 29 30 GND
79 TSP_SYNC_M1 I2S1_MCLK GPIO2_B7 31 32 GPIO3_A6 TSP_D2 SDMMC0EXT_D2 UART1_RX 102
82 TSP_D7_M1 PDM_CLK_M0 I2S1_SCLK GPIO2_C2 33 34 GND
ADC_IN1 35 36 GPIO2_C5 I2S1_SDIO2 PDM_SDI2_M0 CARD_DET_M1 85
66 IR_RX GPIO2_A2 39 38 GPIO2_C4 2S1_SDIO1 PDM_SDI1_M0 CARD_RST_M1 84
GND 39 40 GPIO2_C6 I2S1_SDIO3 PDM_SDI3_M0 CARD_IO_M1 86

More details about 40-pin Header

  • Pin#12(GPIO2_D2) is also the sleep pin of PMIC RK805. Be careful when you try to control it.
  • Pin#3 and Pin#5 are only for I2C communication.
  • Pins marked with color orange are designed for debug console.
  • SPI: x1, SPI0(Pin#11/13/15/27)
  • I2C: x1, I2C1
  • UART: x1, UART1 and UART2
  • USB: USB20DM(Pin#16) and USB20DP(Pin#18)
  • PDM: x1
  • I2S: x1, I2S1