|
|
| (21 intermediate revisions by the same user not shown) |
| Line 1: |
Line 1: |
| | __NOTOC__ | | __NOTOC__ |
| | + | {{Languages|rockpi4/install}} |
| | + | {{rockpi4_header_es}} |
| | | | |
| − | == Instalación ==
| |
| − | Choose and install an operation system on your ROCK Pi 4. To appropriately follow this installation guide you will need to:
| |
| − | * Choose an installation method
| |
| − | * Download necessary files
| |
| − | * Choose host machine
| |
| − | * Follow flashing instructions
| |
| | | | |
| − | === Methods of Installation ===
| |
| − | In most cases, you will be presented with two options when installing your new operating system onto your ROCK Pi 4:
| |
| − | * eMMC USB upgrade Method
| |
| − | ** The firmware will be downloaded from the USB to the ROCK Pi 4 on board eMMC storage
| |
| − | * Running on SD Card Method
| |
| − | ** The firmware will be written on a SD Card that will lately be inserted onto ROCK Pi 4.
| |
| − | Each Method has its own benefits and requires different levels of experience.
| |
| | | | |
| − | ==== eMMC USB upgrade Method ==== | + | <div class="col-md-12" style="text-shadow: 2px 2px 4px #DDDDDD; box-shadow: 2px 2px 5px #999999;"> |
| − | [http://opensource.rock-chips.com/wiki_Rockusb Rockusb] is a custom USB protocal from Rockchip supported by ROCK Pi 4 and can be used for firmware installation(USB to eMMC). This method applies to advanced users who are most familiar with command line tools or modified/custom source code and need to download such updates to the board for testing/execution.
| + | |
| | | | |
| − | ===== This method requires the following hardware: ===== | + | == Instalación == |
| − | * ROCK Pi 4 board with power supply
| + | Escoge e instala un Sistema Operativo en tu ROCK Pi 4. Para seguir correctamente esta guía de instalación necesitarás: |
| − | * Host machine (Linux/Mac)
| + | * Elegir un método de instalación |
| − | * USB Type-A to Type-A cable
| + | * Descargar los archivos necesarios |
| − | * USB serial to TTL cable(not required to perform flash)
| + | * Tener un ordenador con el que grabar el Sistema Operativo |
| − | * USB Mouse and/or keyboard (not required to perform flash)
| + | * Seguir las instrucciones sobre la grabación flash |
| − | * HDMI Monitor with full size HDMI cable (not required to perform flash)
| + | |
| − | * Ethernet cable (not required to perform flash)
| + | |
| − | | + | |
| − | ===== Go to the [[rockpi4/downloads | Downloads]] to get your system =====
| + | |
| − | | + | |
| − | ===== Choose host machine =====
| + | |
| − | | + | |
| − | * Linux
| + | |
| − | ====== Step 1: Make sure rkdeveloptool is set up on host computer ======
| + | |
| − | | + | |
| − | To build rkdeveloptool on a debain based Linux distribution, follow the instruction below:
| + | |
| − | | + | |
| − | Install build dependecy:
| + | |
| − | sudo apt-get install libudev-dev libusb-1.0-0-dev dh-autoreconf
| + | |
| − | | + | |
| − | Clone the source code and build:
| + | |
| − | git clone https://github.com/rockchip-linux/rkdeveloptool
| + | |
| − | cd rkdeveloptool
| + | |
| − | autoreconf -i
| + | |
| − | ./configure
| + | |
| − | make
| + | |
| − | | + | |
| − | Now you have rkdeveloptool executable at the current directory.
| + | |
| − | sudo cp rkdeveloptool /usr/local/bin/
| + | |
| − | | + | |
| − | ====== Step 2: [[rockpi4/downloads | Downloads]] all necessary images ======
| + | |
| − | For ROCK Pi 4, there are two version of system images, Android and Debian. The system image names have the specified words, like android and debian. And all the system images names are marked with xxx_gpt.img.
| + | |
| − | | + | |
| − | ====== Step 3: Boot device into maskrom mode ======
| + | |
| − | | + | |
| − | 1. Insert eMMC Module into eMMC to uSD card converter board. Insert the converter board into uSD Card Reader, which connects to host
| + | |
| − | Linux OS.
| + | |
| − | | + | |
| − | 2. Use the command to erase the eMMC device
| + | |
| − | $ sudo dd if=/dev/zero of=/dev/sdx bs=1M count=100
| + | |
| − | | + | |
| − | 3. Insert the eMMC onto the socket on board.
| + | |
| − | | + | |
| − | 4. Power on ROCK Pi 4.
| + | |
| − | | + | |
| − | 5. Plug the ROCK Pi 4 to Linux Desktop with USB type A to type A cable. On the host PC, command, lsusb, should show the following VID/PID if the board is in maskrom mode: Bus 003 Device 061: ID 2207:0011
| + | |
| − | | + | |
| − | ====== Step 4: Flash images onto ROCK Pi 4 eMMC and reboot ======
| + | |
| − | | + | |
| − | When you choose the format of xxx-gpt.img, you should follow the steps:
| + | |
| − | $ rkdeveloptool db rk3399_loader_xxx.bin
| + | |
| − | $ rkdeveloptool wl 0 xxx_gpt..img
| + | |
| − | $ rkdeveloptool rd
| + | |
| − | | + | |
| − | Now you reboot the new image on eMMC.
| + | |
| − | | + | |
| − | * Mac | + | |
| − | | + | |
| − | ==== Running on SD Card Method ====
| + | |
| − | | + | |
| − | Running on SD card method allows you to place a microSD card into a ROCK Pi 4 to automatically boot and run.
| + | |
| − | | + | |
| − | ===== This method required the following hardware =====
| + | |
| − | * ROCK Pi 4 board with power supply | + | |
| − | * Host machine (Linux/Mac/Windows) | + | |
| − | * MicroSD card with 8GB or larger of storage | + | |
| − | * USB Mouse and/or keyboard
| + | |
| − | * HDMI Monitor with full size HDMI cable
| + | |
| − | * Ethernet cable
| + | |
| − | | + | |
| − | ===== Go to the [[rockpi4/downloads | Downloads]] to get your system =====
| + | |
| − | | + | |
| − | ===== Choose host machine =====
| + | |
| − | | + | |
| − | The host machine type includes Linux, Mac, Windows. But this solution doesn't support flashing images in xxx-rkupdate.img format.
| + | |
| − | | + | |
| − | ====== Step 1: Make sure etcher is set up on host computer ======
| + | |
| − | | + | |
| − | Download the flash tool, etcher, from [[rockpi4/downloads | Downloads]]. Choose the right version for your host operation system. Here we operate on host Ubuntu 16.04.
| + | |
| − | | + | |
| − | After download the package, unpack it.
| + | |
| − | | + | |
| − | ====== Step 2: [[rockpi4/downloads | Downloads]] all necessary images ======
| + | |
| − | | + | |
| − | For ROCK Pi 4, there are two version of system images, Android and Debian. The system image names have the specified words, like android and debian. And all the system images names are marked with xxx_gpt.img.
| + | |
| − | | + | |
| − | ====== Step 3: Flash the image into uSD Card ======
| + | |
| − | | + | |
| − | 1. Insert the uSD Card into uSD Card Reader, which connects to host computer.
| + | |
| − | | + | |
| − | 2. Run the application, for example, by executing the command on Ubuntu 16.04:
| + | |
| − | | + | |
| − | $ /bin/bash etcher-etcher-electron-1.4.5-x86_64.AppImage
| + | |
| − | | + | |
| − | 3. In the etcher window, we click button Select image.
| + | |
| − | | + | |
| − | [[File:linux_etcher_select_image.png]]
| + | |
| − | | + | |
| − | 4. In the etcher window, we click button Select Drive.
| + | |
| − | | + | |
| − | [[File:linux_etcher_select_driver.png]]
| + | |
| − | | + | |
| − | 5. In the etcher window, we click button Flash.
| + | |
| − | | + | |
| − | [[File:linux_etcher_select_flash_button.png]]
| + | |
| | | | |
| − | 6. In the etcher window, it shows us Flash Complete!
| + | === Métodos de Instalación === |
| | | | |
| − | [[File:linux_etcher_show_complete.png]] | + | * [[rockpi4/install/microSD/es_es | Instalar en tarjeta microSD]] |
| | + | * [[rockpi4/install/eMMC/es_es | Instalar en memoria eMMC]] |
| | + | * [[rockpi4/install/USB/es_es | Instalar en pendrive USB]] |
| | + | * [[rockpi4/install/NVME/es_es | Instalar en memoria SSD NVME M.2 NVME]] |
| | + | ---- |
| | + | * [[rockpi4/radxa-apt/es_es | Actualizar el Repositorio Radxa Apt]] |
| | + | ---- |
| | + | * [[rockpi4/partitions/es_es | Tabla de Particiones]] |
| | | | |
| − | 7. Insert uSD Card into the socket on board.
| |
| | | | |
| − | 8. Connect the ROCK Pi 4 to your display with the HDMI cable. Ensure that the source for the display is switched to the HDMI port you are using.
| + | En la mayoría de los casos, tendremos dos opciones a la hora de instalar un nuevo Sistema Operativo en nuestro ROCK Pi 4: |
| | | | |
| − | 9. Connect the USB keyboard and mouse.
| + | * Mediante tarjeta microSD |
| | + | ** El Sistema Operativo en forma de imagen se escribirá en una tarjeta uSD que posteriormente se insertará en el ROCK Pi 4. |
| | + | * Mediante actualización de la memoria eMMC por USB |
| | + | ** El Sistema Operativo se pasará en forma de imagen mediante cable USB a la memoria eMMC del ROCK Pi 4 |
| | | | |
| − | 10. Connect the power supply to the ROCK Pi 4. The board will begin to immediately.
| + | No obstante, ROCK Pi 4 soporta diferentes medios de almacenamiento para realizar la instalación, cada uno con diferente velocidad de lectura/escritura. |
| | + | </div> |
