Please enable javascript, or click here to visit my ecommerce web site powered by Shopify.
Jump to: navigation, search

Rockpi4/install/android-microSD

< Rockpi4‎ | install
Revision as of 07:31, 15 June 2020 by Hipboi (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
    ROCK Pi 4 >  Install >  Install on microSD

Requirements

This page describe how to download and install the android gpt image on a microSD card and boot on ROCK Pi 4. You need at least the following.

  • ROCK Pi 4 board with power supply
  • a microSD card, larger than 8GB, class 10 or better
  • a microSD card reader, either a USB card reader or the SD card reader on laptop
  • a PC/laptop running Windows or Linux or MacOS


Etcher in Linux/Windows

Etcher is the tool we use to write image. Download the right Etcher for your PC from Rockpi4/downloads page and install it.

Check [Etcher website] for more info about Etcher.


Step1: Download necessary tools and image

Choose the image you want to install may be from Rockpi4/downloads page and unzip it. The unzipped image name is like below:

   rockpi-4b-*-gpt.img

We will use it for the writing.


Step2: Write the image to microSD card

1. Insert the uSD Card into uSD Card Reader, which connects to host computer.

2. Run the application, for example, by executing the command on Ubuntu 16.04:

   $ /bin/bash etcher-etcher-electron-1.4.5-x86_64.AppImage

3. In the etcher window, we click button Select image.

Linux etcher select image.png

4. In the etcher window, we click button Select Drive.

Linux etcher select driver.png

5. In the etcher window, we click button Flash.

Linux etcher select flash button.png

6. In the etcher window, it shows us Flash Complete!

Linux etcher show complete.png

Done! Now you have successfully installed the OS image on microSD card.


Other

Here's an easy way to do it on Linux

   radxa$ sudo chmod 777 /dev/<Your TF card device>*
   radxa$ umount /dev/<Your TF card device>*
   radxa$ dd if=rockdev/Image/rockpi-4b-*-gpt.img of=/dev/<Your TF card device> bs=4M status=progress
   radxa$ sync