Difference between revisions of "Rockpi4/hardware/revision"

Revision as of 02:54, 27 May 2021

    ROCK Pi 4 >  Hardware >  Hardware Revision

There are three models of ROCK Pi 4, model A, model B and model C. Model A is a stripped down version of model B. Model C is an enhanced version of model B. The differences are:

• Model A vs. Model B
  • Model A doesn't have wifi/bt model(ap6256)
  • the RJ45 connector on model A doesn't support PoE
  • Model A doesn't have the 4Pin PoE header

• Model B vs. Model C
  • Model C adds one additional mini DP port based on model B
  • Model C changes the HDMI connector from type A to type D(micro HDMI)

Change lists

Model A | B

V1.3

This is the first MP version, the key features are:

• User type C for power, adds QC&PD trigger IC
• LPDDR4 for 1/2/4GB ram
• Use odroid compatible eMMC socket as storage
• On board wifi antenna

V1.4

V1.4 is a slightly updates based on the V1.3, solves the issues reported by users. The schematic is the same as V1.3.

• Changes the USB3 OTG label to simple L/H for Host/Device
• Add external wifi antenna option, not soldered by default
• Change the headphone footprint to through hole leg one
• Change user status LED from red to blue(blinking red led is confusing for some user)
• A 4MB(32Mbit) SPI flash is pasted by default, for future SPI booting support

V1.6(4B+)

• Add USB C input voltage measure from SoC ADC
• Add EEPROM (BL24C16A) for mac address and serial no. store
• eMMC socket changed to on board chips

Model C

v1.2

• change to a more tight micro HDMI connector