Rockpi4/hardware/led

There are 2 LEDs on the Rock Pi 4.

Power

It is green in color and used to indicate power supply.

Status

It is red for Rock Pi 4 v1.3 and blue for Rock Pi 4 v1.4. Shows the status of the device.

For newer kernel, the status LED is configured as heart beat device and usually blinks on/after booting successfully.

Its function can be changed as desired.

 $ cat /sys/class/leds/user-led2/trigger
 none rc-feedback kbd-scrolllock kbd-numlock kbd-capslock kbd-kanalock kbd-shiftlock kbd-altgrlock kbd-ctrllock kbd-altlock kbd-shiftllock kbd-shiftrlock kbd-ctrlllock kbd-ctrlrlock mmc0 mmc1 timer oneshot [heartbeat] backlight gpio cpu0 cpu1 cpu2 cpu3 cpu4 cpu5 default-on rfkill0 mmc2 rfkill1 rfkill2

For example, to set it to show emmc read/write status:

 # echo mmc1 >  /sys/class/leds/user-led2/trigger