Please enable javascript, or click here to visit my ecommerce web site powered by Shopify.
Jump to: navigation, search

Difference between revisions of "Rockpi4/hardware/HATs"

(ROCK PI POE HAT)
Line 14: Line 14:
 
Zwave module by Z-Wave.Me. It uses uart2 TX/RX on the 40PIN GPIO. Tested working on ROCK Pi 4 by disabling the serial console on uart2. See [https://forum.radxa.com/t/configuring-kernel-before-building/123/22 discussion on the forum].
 
Zwave module by Z-Wave.Me. It uses uart2 TX/RX on the 40PIN GPIO. Tested working on ROCK Pi 4 by disabling the serial console on uart2. See [https://forum.radxa.com/t/configuring-kernel-before-building/123/22 discussion on the forum].
  
=== ROCK PI POE HAT ===
+
=== ROCK Pi PoE HAT ===
 +
 
 +
ROCK Pi PoE allows to provide both  power and network connectivity to your ROCK Pi across a single Ethernet cable.
 +
 
 +
[[File:rockpi_poe.png | 600px]]
 +
 
 +
==== Feature  ====
 +
 
 +
* 802.11 AT up to 23W
 +
* PWM control FAN up to 12000RPM
 +
* Temperature sensor
 +
* Optional 40PIN GPIO exported
 +
* Compatible with ROCK Pi 4 and Raspberry Pi
 +
* Gigabit ethernet
 +
 
 +
==== Caution ====
 +
 
 +
* The power to the ROCK Pi PoE from the managed switch or from the external injector should only be applied after the Ethernet cables have been connected.
 +
* Connect the the fan as showm below
 +
 
 +
[[File:rockpi_poe_fan_connection.png | 600px]]
 +
 
 +
==== Software and  Samples ====

Revision as of 03:00, 17 May 2019

    ROCK Pi 4 >  Hardware >  HATs

Introductions

A HAT (Hardware Attached on Top) is an add-on board for ROCK Pi 4 that conforms to a specific set of rules that will make life easier for users.

HATs Lists

A list of working HATs tested by radxa and the community.

RaZberry/RaZberry2

Zwave module by Z-Wave.Me. It uses uart2 TX/RX on the 40PIN GPIO. Tested working on ROCK Pi 4 by disabling the serial console on uart2. See discussion on the forum.

ROCK Pi PoE HAT

ROCK Pi PoE allows to provide both power and network connectivity to your ROCK Pi across a single Ethernet cable.

600px

Feature

  • 802.11 AT up to 23W
  • PWM control FAN up to 12000RPM
  • Temperature sensor
  • Optional 40PIN GPIO exported
  • Compatible with ROCK Pi 4 and Raspberry Pi
  • Gigabit ethernet

Caution

  • The power to the ROCK Pi PoE from the managed switch or from the external injector should only be applied after the Ethernet cables have been connected.
  • Connect the the fan as showm below

600px

Software and Samples