Please enable javascript, or click here to visit my ecommerce web site powered by Shopify.
Jump to: navigation, search

Rockpi4/getting started/troubleshooting

< Rockpi4‎ | getting started
Revision as of 11:56, 14 December 2018 by Hipboi (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
    ROCK Pi 4 >  Getting Started >  Troubleshooting

Check if the Pi is live(in maskrom mode)

By default, with no boot media, the ROCK Pi 4 will boot into maskrom mode, which will use the USB OTG port(the upper USB 3.0 type A) to communicate with HOST PC.

Check the serial console

By default, the ROCK Pi 4 uses the 40PIN GPIO header PIN8 and PIN10.