Difference between revisions of "Rockpi4/dev/usb-install"
| Line 1: | Line 1: | ||
{{rockpi4_header}} | {{rockpi4_header}} | ||
{{Languages|rockpi4/dev/usb-install}} | {{Languages|rockpi4/dev/usb-install}} | ||
| + | [[rockpi4 | ROCK Pi 4]] > [[rockpi4/dev | Development]] > [[rockpi4/dev/usb-install | Install from USB OTG port]] | ||
ROCK Pi supports maskrom mode, which is a special running mode the CPU is waiting for command from USB OTG port. The PC tool we use to communicate with ROCK Pi in maskrom mode is rkdevelop tool, an open source tool by Rockchip. | ROCK Pi supports maskrom mode, which is a special running mode the CPU is waiting for command from USB OTG port. The PC tool we use to communicate with ROCK Pi in maskrom mode is rkdevelop tool, an open source tool by Rockchip. | ||
Revision as of 09:49, 4 December 2018
ROCK Pi 4 > Development > Install from USB OTG port
ROCK Pi supports maskrom mode, which is a special running mode the CPU is waiting for command from USB OTG port. The PC tool we use to communicate with ROCK Pi in maskrom mode is rkdevelop tool, an open source tool by Rockchip.
Install rkdeveloptool
Linux
To build rkdeveloptool on a debain based Linux distribution, follow the instruction below:
Install build dependecy:
sudo apt-get install libudev-dev libusb-1.0-0-dev dh-autoreconf
Clone the source code and build:
git clone https://github.com/rockchip-linux/rkdeveloptool cd rkdeveloptool autoreconf -i ./configure make
Now you have rkdeveloptool executable at the current directory.
sudo cp rkdeveloptool /usr/local/bin/
Boot the board to maskrom mode
To boot ROCK Pi into maskrom mode is simple, just remove any bootable storage media, remove microSD card, remove eMMC module.
Install to eMMC via USB
TBD...