Please enable javascript, or click here to visit my ecommerce web site powered by Shopify.
Jump to: navigation, search

Rock3/CM3

< Rock3
Revision as of 13:18, 11 March 2022 by Jack-ma (Talk | contribs)


ROCK3 Compute Module

Radxa ROCK3 Computing Module(Radxa CM3 series) is a series System-on-Module based on the ROCK3, containing processor, memory, eMMC Flash and Power Management Unit. These modules allow a designer to leverage the ROCK3 hardware and software stack in their own custom systems and form factors. In addition these modules have extra IO interfaces over and above what is available on the ROCK3 boards, opening up more options for the designer. ROCK3 series compute modules comes in the following form factors:

  • CM3: 3x 100P B2B connector
  • CM3 SODIMM: CM3 in SODIMM form factor, 200P DDR2 edge connector + 100P B2B connector
  • CM3 Plus: CM3 with more features such as PCIe 3.0


Specification

Cm3.png Cm3 sodimm.png Cm3 plus.png
CM3 CM3 SODIMM CM3 Plus
Form factor: 55 mm × 40 mm 32 mm x 67.6 mm 70 mm x 40 mm
Processor: Rockchip RK3566, Quad core Cortex-A55 (ARM v8) 64-bit SoC @ 2.0GHz Rockchip RK3568, Quad core Cortex-A55 (ARM v8) 64-bit SoC @ 2.0GHz
Memory: 1GB, 2GB, 4GB or 8GB LPDDR4 (depending on variant)
Storage: 8GB, 16GB, 32GB, 64GB, 128GB (depending on variant) high performance eMMC
Connectivity: - Optional wireless LAN, 2.4GHz and 5.0GHz IEEE 802.11b/g/n/ac wireless, Bluetooth 5.0, BLE with onboard and external antenna
- Onboard Gigabit Ethernet PHY
- 1 x USB 2.0 port ( highspeed ), 1 x USB 3.0 port ( 5Gbps )
- 1 x PCIe 1-lane Host, Gen 2 ( 5Gbps )
- 2 x SATA ports, one shared with USB 3, one shared with PCIe
- 50 x GPIO supporting
- Optional wireless LAN, 2.4GHz IEEE 802.11b/g/n wireless, Bluetooth 4.2, BLE with external antenna
- 1 x Gigabit Ethernet MAC
- 1 x USB 2.0 port ( highspeed ), 1 x USB 3.0 port ( 5Gbps )
- 1 x PCIe 1-lane Host, Gen 2 ( 5Gbps )
- 2 x SATA ports, one shared with USB 3, one shared with PCIe
- 50 x GPIO supporting
- Optional wireless LAN, 2.4GHz and 5.0GHz IEEE 802.11b/g/n/ac wireless, Bluetooth 5.0, BLE with onboard and external antenna
- 1 x Onboard Gigabit Ethernet PHY, 1x Gigabit Ethernet MAC
- 2 x USB 2.0 port ( highspeed ),
- 1 x USB 3.0 HOST port ( 5Gbps ), 1 x USB 3.0 OTG port ( 5Gbps )
- 1 x PCIe 1-lane Host, Gen 2 ( 5Gbps )
- 1 x PCIe 2-lane(1x2, 1x1+1x1) Host, Gen 3 (16Gbps)
- 3 x SATA ports, one shared with USB 3 HOST, one shared with PCIe, one shared with USB 3 OTG
- 50 x GPIO supporting
Video: - 1x HDMI up to 4K x 2K@60HZ
- 1x eDP four lanes, 2.7Gps per lane
- 2x MIPI DSI four lanes, 1.6Gbps per lane
- 1x LVDS four lanes(mux with MIPI DSI0)
Audio: - LINEOUT
- I2S
- PDM, support mic array
Multimedia: - VP9/H.264/H.265 decode 4K@60HZ
- H.264/H.265 encode 1080P@100HZ
- OpenGL ES 3.2/OpenCL 2.0/Vulkan 1.1 GPU
Input power: 5V DC
Connector: 3x 100P 0.4mm pitch B2B connector 200P SODIMM edge golden finger connector + 100P 0.5mm pitch B2B connector 4x 100P 0.4mm pitch B2B connector
Production lifetime: Radxa CM3, CM3 Plus, CM3 SODIMM will remain in production until at least Sep 2029

Devices

Carrier Boards from Radxa

Picture Name Info
Radxa e23 top bottom.jpg Radxa E23 Dual Ethernet board
Radxa cm3 io board.jpg Radxa ROCK3 Compute Module IO Board

Carrier Boards from third party

The following carrier boards are tested and compatible with the Radxa CM3.


Picture Name Info
Cm3 rpicm4 io board.png Raspberry Pi Compute Module 4 IO Board website
Cm3 seeed dual gbe.png Seeed Studio Dual Gigabit Ethernet Carrier Board website
Cm3 waveshare cm4 io base.jpg Waveshare CM4 IO Base website
Cm3 mcuzone cm4 mini.jpg Mcuzone CM4 Mini website
Cm3 mcuzone cm4 tiny.jpg Mcuzone CM4 Tiny website