Please enable javascript, or click here to visit my ecommerce web site powered by Shopify.
Jump to: navigation, search

Difference between revisions of "Rock3/CM3"

(Carrier Boards from third party)
Line 134: Line 134:
 
|  
 
|  
 
|-
 
|-
 +
| [[File:Cm3_waveshare_cm4_io_base.jpg | x100px ]]
 +
| Waveshare CM4 IO Base
 
|  
 
|  
|  
+
|-
 +
| [[File:Cm3_mcuzone_cm4_mini.jpg | x100px]]
 +
| Mcuzone CM4 Mini
 
|  
 
|  
 
|-
 
|-
|  
+
| [[File:Cm3_mcuzone_cm4_tiny.jpg | x100px]]
|  
+
| Mcuzone CM4 Tiny
 
|  
 
|  
 
|}
 
|}

Revision as of 09:36, 11 October 2021


ROCK3 Compute Module

ROCK 3 Computing Module(ROCK CM3) is a System-on-Module based on the ROCK3, containing processor, memory, eMMC Flash and Power Management Unit. These modules allow a designer to leverage the ROCK3 hardware and software stack in their own custom systems and form factors. In addition these modules have extra IO interfaces over and above what is available on the ROCK3 boards, opening up more options for the designer.



Quick Feature Comparison Table

Raspberry Pi CM4 Radxa ROCK3 CM
Broadcom BCM2711, Quad core Cortex-A72 (ARM v8) 64-bit SoC @ 1.5GHz Rockchip RK3566, Quad core Cortex-A55 (ARM v8) 64-bit SoC @ 2.0GHz
Small Footprint 55mm × 40mm × 4.7mm module Small Footprint 55mm × 40mm × 4.7mm module
Options for 1GB, 2GB, 4GB or 8GB LPDDR4-3200 SDRAM with ECC Options for 1GB, 2GB, 4GB or 8GB LPDDR4-3200 SDRAM with ECC
Options for 0GB (CM4Lite), 8GB, 16GB, or 32GB eMMC Flash memory, Peak eMMC bandwidth 100MBytes/s Options for 0GB, 8GB, 16GB, 32GB, 64GB, 128GB eMMC Flash memory, Peak eMMC bandwidth 250MBytes/s
Option for WiFi5/BT5 Option for WiFi5/BT5
Gigabit Ethernet PHY supporting IEEE 1588 Gigabit Ethernet PHY(RTL8211F), optional IEEE 1588 support
1 × USB 2.0 port ( highspeed ) 1 × USB 2.0 port ( highspeed ), 1 x USB 3.0 port (5Gbps)
1 × PCIe 1-lane Host, Gen 2 ( 5Gbps ) 1 × PCIe 1-lane Host, Gen 2 ( 5Gbps )
N/A 2 x SATA ports, one shared with USB 3, one shared with PCIe
2 x HDMI 2.0(up to 4K60) 1 x HDMI(up to 4K60)
MIPI DSI:
- 1 × 2-lane MIPI DSI display port
- 1 × 4-lane MIPI DSI display port
MIPI DSI:
- 2 × 4-lane MIPI DSI display port
- 1 x 4-lane LVDS support(shared with 1 x MIPI)
eDP:
- 1 x eDP up to 4K60
MIPI CSI-2:
- 1 × 2-lane MIPI CSI camera port
- 1 × 4-lane MIPI CSI camera port
MIPI CSI-2:
- 1 × 2-lane MIPI CSI camera port
- 1 × 4-lane MIPI CSI camera port
1 × SDIO 2.0 (CM4Lite only) 1 x SDIO 3.0
N/A Audio Codec
28 × GPIO supporting either 1.8v or 3.3v signalling and peripheral options:
- Up to 5 × UART
- Up to 5 × I2C
- Up to 5 × SPI
- 1 × SDIO interface
- 1 × DPI (Parallel RGB Display)
- 1 × PCM Up to
- 2× PWM channels
- Up to 3× GPCLK outputs
50 × GPIO supporting either 1.8v or 3.3v signalling and peripheral options:
- Up to 8 × UART
- Up to 8 × I2C
- Up to 4 × SPI
- 1 × SDIO interface
- 1 × PCM
- Up to 8 × PWM channels
- 2 x ADC
Single +5v PSU input Single +5v PSU input
2 x 100Pin B2B connector 3 x 100Pin B2B connector

Devices

Carrier Boards from Radxa

Picture Name Info
Radxa e23 top bottom.jpg Radxa E23 Dual Ethernet board


Carrier Boards from third party

The following carrier boards are tested and compatible with the ROCK3 CM.


Picture Name Info
Cm3 rpicm4 io board.png Raspberry Pi Compute Module 4 IO Board
Cm3 seeed dual gbe.png Seeed Studio Dual Gigabit Ethernet Carrier Board
Cm3 waveshare cm4 io base.jpg Waveshare CM4 IO Base
Cm3 mcuzone cm4 mini.jpg Mcuzone CM4 Mini
Cm3 mcuzone cm4 tiny.jpg Mcuzone CM4 Tiny