Difference between revisions of "Rock3/CM/CM3"
RadxaYuntian (Talk | contribs) (→Carrier Boards from third party) |
(→Resources) |
||
| Line 68: | Line 68: | ||
* [[Rock3/CM3/models | Order Info(Models & SKU)]] | * [[Rock3/CM3/models | Order Info(Models & SKU)]] | ||
* [[Rock3/CM3/pinout | CM3 Pinout]] | * [[Rock3/CM3/pinout | CM3 Pinout]] | ||
| − | * [https://dl.radxa.com/cm3/docs/radxa-cm3-product-brief_Revision_1. | + | * [https://dl.radxa.com/cm3/docs/radxa-cm3-product-brief_Revision_1.3.pdf Radxa CM3 Product Brief v1.3] |
* Compliance | * Compliance | ||
Revision as of 01:46, 25 May 2023
Radxa CM3
Radxa Compute Module 3(Radxa CM3) is an SoM(System on Module) by Radxa based on Rockchip RK3566 SoC in a small form factor at 55mm x 40mm size, integrating CPU/PMU/DRAM/STORAGE/Wireless. Radxa CM3 offers out of box cost-effective solution for multiple purpose applications, accelerates customer's product development.
Block Diagram
Components Overview
| No. | Description | No. | Description |
|---|---|---|---|
| ① | SPI Flash disable button | ⑧ | RK817-5 PMIC |
| ② | SPI Flash | ⑨ | RTL8211F ethernet phy |
| ③ | eMMC disable button | ⑩ | eMMC chip |
| ④ | WiFi/BT module | ⑪ | B2B connector 2 (J68) |
| ⑤ | WiFi/BT antenna | ⑫ | B2B connector 3 (J1) |
| ⑥ | LPDDR4 dram chip | ⑬ | B2B connector 1 (J69) |
| ⑦ | RK3566 SoC |
Pinout
Refer rock3/CM/CM3/pinout page
Resources
- Compliance
- CE RED
- FCCID: 2A3PA-RADXA-CM3
- Design files of CM3
- v1.2 schematic pdf - Download Schematic of CM3
- v1.2 CAM pdf - Download components Position Reference of CM3
- v1.3 schematic pdf - Download Schematic of CM3
- v1.3 CAM pdf - Download components Position Reference of CM3
- Reference design of carrier board(CM3 IO Board)
- Hardware Revision - Difference between each hardware revisions
- Models and SKUs - Different variant of each models
Devices
Carrier Boards from Radxa
| Picture | Name | Info |
|---|---|---|
|
Radxa E23 Dual Ethernet board | |
|
Radxa ROCK3 Compute Module IO Board |
Carrier Boards from third party
The following carrier boards are tested and compatible with the Radxa CM3 with on-board eMMC.
Currently no eMMC revision cannot boot from microSD on Raspberry Pi CM4 IO and compatibles. We will fix this in a later hardware revision.
