Difference between revisions of "Rock/sd lubuntu"

Revision as of 02:06, 3 May 2014

How to set up booting from an SD Card

Get a parameter file from http://dl.radxa.com/rock/images/parameter/, make sure the root command entry of parameter file is root=/dev/mmcblk0p1

Flash it to the board with RKAndroidTool(Windows) from here. Linux instructions here.

It should now boot from SD Card

Example parameter file:

FIRMWARE_VER:4.2.2
MACHINE_MODEL:radxa_rock
MACHINE_ID:007
MANUFACTURER:RADXA
MAGIC: 0x5041524B
ATAG: 0x60000800
MACHINE: 3066
CHECK_MASK: 0x80
KERNEL_IMG: 0x60408000
#RECOVER_KEY: 1,1,0,20,0
CMDLINE:console=ttyFIQ0,115200 console=tty0 root=/dev/mmcblk0p1 rw rootfstype=ext4 mac_addr=12:21:34:43:56:65 init=/sbin/init initrd=0x62000000,0x00800000 mtdparts=rk29xxnand:0x00008000@0x00002000(boot),-@0x0000A000(linuxroot)

Create Lubuntu SD Card

Get a rootfs-desktop.img file from http://dl.radxa.com/rock/images/ubuntu/partitions/
Unzip it
Finally copy rootfs image to sd card.

$ sudo dd if=mydir/rootfs-desktop.img of=/dev/mmcblk0p1
$ sync

Resize SD Card

$ sudo resize2fs -p /dev/mmcblk0p1

@@ Line 1: / Line 1: @@
 === How to set up booting from an SD Card ===
-Get a parameter file from http://dl.radxa.com/rock/images/ubuntu/
+* Get a parameter file from http://dl.radxa.com/rock/images/parameter/, make sure the root command entry of parameter file is '''root=/dev/mmcblk0p1'''
-change root command entry of parameter file to "root=/dev/mmcblk0p1"
-upload it with RKAndroidTool from [http://dl.radxa.com/rock/tools/windows/RKDevelopTool_v1.37.zip here]. to the RADXA
+* Flash it to the board with RKAndroidTool(Windows) from [http://dl.radxa.com/rock/tools/windows/RKDevelopTool_v1.37.zip here]. Linux instructions [[Rock/flash_the_image#Flash_update.img | here]].
-It should now boot from SD Card
+* It should now boot from SD Card
 Example parameter file: