Please enable javascript, or click here to visit my ecommerce web site powered by Shopify.
Jump to: navigation, search

Difference between revisions of "Rock/hardware revision"

(Circuit side)
m (Download: Correct link to PDF for top components position reference)
Line 34: Line 34:
 
* [http://dl.radxa.com/rock/docs/hw/RADXA_ROCK_schematic_20131025.pdf Schematic(.pdf)]
 
* [http://dl.radxa.com/rock/docs/hw/RADXA_ROCK_schematic_20131025.pdf Schematic(.pdf)]
 
* [http://dl.radxa.com/rock/docs/hw/RADXA_ROCK_20131025.dxf Dimension file(.dxf)]
 
* [http://dl.radxa.com/rock/docs/hw/RADXA_ROCK_20131025.dxf Dimension file(.dxf)]
* Components position reference [http://dl.radxa.com/rock/docs/hw/componets_position_ref_bottom_20131025.pdf top] [http://dl.radxa.com/rock/docs/hw/componets_position_ref_bottom_20131025.pdf bottom]
+
* Components position reference [http://dl.radxa.com/rock/docs/hw/componets_position_ref_top_20131025.pdf top] [http://dl.radxa.com/rock/docs/hw/componets_position_ref_bottom_20131025.pdf bottom]

Revision as of 14:31, 5 February 2014

This page describe the difference in hardware of all rock hardware revisions.

Revision 2013.08.12(Engineering samples)

The first batch of radxa rock samples, also called radxa rock engineering samples, only 100pcs are made(Limited Edition :). Almost everything work fine on this revision. However there is still some small issue such as

  • The HDMI connector is too close to the SPDIF jack, may conflict with some big header of the HDMI cable
  • The UART can be damaged sometimes by some 5V TTL to USB cable (Warning: do use 3.3V TTL to USB cable)
  • The reset key is acted as POWER halt function, rebooting the board need to press the reset key and then the power key.

Download

Revision 2013.10.25(First MP version)

This is the first MP version of radxa rock, which fixed all the known issue on the 2013.08.12 revision. Since the position of the HDMI connector is moved a little bit. Some cases of this revision can not be used on previous revision, except the very simple case. The software are the same with previous revisions.

Changes

What hardware improvement on the previous version

Circuit side

  1. Add UART protection for the 5V TTL to USB cable (But 3.3V TTL to USB cable is recommended)
  2. Add power control for the USB OTG
  3. Add 3.3V power reservation for the RTC

PCB side

  1. Change the "radxa rock" text to the radxa logo :)
  2. 1mm more space between HDMI and SPDIF connector
  3. Change the color of status led1 from yellow to blue
  4. Change some label print to more readable text such as DC5v@2A, Rst to Reset
  5. Better footprint of the crystal of the USB hub

Download