Rock/display

English

The cpu of Radxa Rock - RK3188 has two LCD controllers, LCD0 and LCD1. On RR, LCD1 is connected to HDMI and LCD0 is connect to AV out and the LCD0 signal are also exported on the extension header.

There is some sysfs interface exported to control the display related stuff. The following should work on both Android and Linux.

set display scale

   root@radxa:# cat /sys/devices/platform/rk-fb/graphics/fb0/scale
   xscale=95 yscale=95
   root@radxa:# echo xscale=100 >  /sys/devices/platform/rk-fb/graphics/fb0/scale
   root@radxa:# echo yscale=100 >  /sys/devices/platform/rk-fb/graphics/fb0/scale     
   root@radxa:# cat /sys/devices/platform/rk-fb/graphics/fb0/scale
   xscale=100 yscale=100

set HDMI output mode

you can see supported output modes by the following commands:

   root@radxa:# cat /sys/class/display/display0.HDMI/modes 
   1920x1080p-60
   1920x1080p-50
   1280x720p-60
   1280x720p-50
   720x576p-50
   720x480p-60

check out the current display mode

   root@radxa:# cat /sys/class/display/display0.HDMI/mode
   1280x720p-60

It's 720p@60hz

change the mode to 1080p@60hz

   root@radxa:# echo 1920x1080p-60 > /sys/class/display/display0.HDMI/mode

Set HDMI console font

rock@radxa:~$ sudo nano ~/.Xresources

add the following lines:

! Xft settings 
Xft.dpi: 120
Xft.antialias: true
Xft.rgba: rgb
Xft.hinting: true
Xft.hintstyle: hintslight

this does not solve the problems on the console, but:

rock@radxa:~$ sudo dpkg-reconfigure console-setup

hit enter, hit enter, choose the font and hit enter, hit enter, choose size and hit enter switch to console via ctrl+alt+f1 and verify your settings

root@radxa:~# setupcon

find your best solution, I go with TerminusBold 28x14