Please enable javascript, or click here to visit my ecommerce web site powered by Shopify.
Jump to: navigation, search

ROCKPI S PoE HAT

Revision as of 14:46, 14 July 2020 by Hipboi (Talk | contribs)


    Home >  ROCK Pi S PoE HAT

Introduction

S PoE HAT.png

ROCK Pi S PoE HAT is a HAT accessories designed for ROCK Pi S. The ROCK Pi S PoE HAT allows you to power your ROCK Pi S using Power over Ethernet–enabled networks; for this product to be used, the network it is connected to needs to have power-sourcing equipment installed.

It comes with the following features:

  • 802.3af up to 10W(5V/2A)
  • Optional 26PIN x2 GPIO pass-through exported
  • Works with ROCK Pi S
  • Clean design by hiding the the big transformer inside
  • EEPROM for HAT identity and driver probe
  • headphone jack exported
  • Provide 12V power output with 2P connector

Supplied with this product

  • ROCK Pi S PoE HAT
  • Mechanical spacers

Other hardware needed

  • ROCK Pi S
  • An Ethernet cable
  • Power-sourcing equipment for a 802.3af or 802.3at Power over Ethernet network

Software support

The PoE doesn't require software to power and run. For the head phone jack and PDM Mic Array support, please update to the latest ROCK Pi S firmware.

Model

Model Description
FS For ROCK Pi S
FSL FS with 26PIN x2 GPIO pass-through exported

The difference between F3 and F4 is, F3 and F4 uses different GPIO for fan control. F4 use ADC for temperature detection, while F3 uses DS18B20.

PINOUT

PoE HAT for ROCK Pi S

Description Function Pin# Pin# Function Description
1 2
3 4
5 6
GPIO2_B3 7 8
9 10
11 12
control fan speed PWM1 13 14
GPIO4_C5 15 16 GPIO4_D2 enable/disable fan motor driver
17 18
19 20
21 22
23 24
25 26 ADC_IN0 Get ADC value to get the temperature value
connect to EEPROM SDA pin I2C2_SDA 27 28 I2C2_SCL connect to EEPROM SCL pin
29 30
31 32
33 34
35 36
37 38
39 40


Dimensions