Please enable javascript, or click here to visit my ecommerce web site powered by Shopify.
Jump to: navigation, search

ROCKPI 13W PoE HAT

Revision as of 10:17, 25 August 2020 by Hipboi (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)


    Home > PoE HAT >  ROCK Pi 13W PoE HAT

Introduction

Rockpi e with 13w poe angel.jpg

ROCK Pi 13W PoE HAT is a HAT accessories designed for ROCK Pi 4, ROCK Pi E, Raspberry Pi 3B+/4, Jetson Nano or ROCK Pi X. The ROCK Pi 13W PoE HAT allows you to power your ROCK Pi 4, Raspberry Pi 3B+/4, Jetson Nano or ROCK Pi X using Power over Ethernet–enabled networks; for this product to be used, the network it is connected to needs to have power-sourcing equipment installed.

It comes with the following features:

  • 802.3af up to 13W(5V/2.6A)
  • Optional 40PIN GPIO pass-through exported
  • Works with ROCK Pi 4, ROCK Pi E, Raspberry Pi 3B+/4, Jetson Nano or ROCK Pi X
  • Clean design by hiding the the big transformer inside
  • EEPROM for HAT identity and driver probe
  • USB 5V voltage output via USB A port(USB OTG function for ROCK Pi E)
  • Provide 12V power output with 2P terminal connector

Supplied with this product

  • ROCK Pi 13W PoE HAT
  • Mechanical spacers

Other hardware needed

  • One of ROCK Pi 4, ROCK Pi E, Raspberry Pi 3B+/4, Jetson Nano or ROCK Pi X
  • An Ethernet cable
  • Power-sourcing equipment for a 802.3af or 802.3at Power over Ethernet network

Software support

The PoE doesn't require software to power and run.

Model

Model Description
F3 For Raspberry Pi 3B+, Raspberry Pi 4, ROCK Pi X, Jetson Nano
F3L F3 with 40PIN GPIO pass-through exported
F4 Use with ROCK Pi 4
F4L F4 with 40PIN GPIO pass-through exported
FE For ROCK Pi E
FEL FE with 40PIN GPIO pass-through exported

PINOUT

PoE HAT for ROCK Pi 4

Description Function Pin# Pin# Function Description
1 2
3 4
5 6
GPIO2_B3 7 8
9 10
11 12
control fan speed PWM1 13 14
GPIO4_C5 15 16 GPIO4_D2 enable/disable fan motor driver
17 18
19 20
21 22
23 24
25 26 ADC_IN0 Get ADC value to get the temperature value
connect to EEPROM SDA pin I2C2_SDA 27 28 I2C2_SCL connect to EEPROM SCL pin
29 30
31 32
33 34
35 36
37 38
39 40


Dimensions