Please enable javascript, or click here to visit my ecommerce web site powered by Shopify.
Jump to: navigation, search

Penta SATA HAT

Revision as of 11:03, 23 September 2019 by Hipboi (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Introduction

ROCK Pi Penta SATA HAT is an addon HAT designed for ROCK Pi 4. It utilizes the high speed PCIe buses on ROCK Pi 4 and providing a complete NAS solution based on ROCK Pi 4. It has the following features:

  • Up to 5x HDD/SSD, support 2.5inch or 3.5inch SSD, up to 100T Storage
  • 4x SATA + 1x eSATA with power
  • Utilize two lanes PCIe 2.1 buses on ROCK Pi 4
  • Type C power input with USB PD support for both 2.5inch SSD and ROCK Pi 4
  • External standard ATX power supply support for 3.5inch HDD
  • Support HDD suspend mode
  • Support software RAID 0/1/5
  • Optional PWM control fan for HDD heat dispatching
  • Optional OLED display for IP/Storage info

Supplied with this product

2.5 inch version

  • Penta SATA HAT
  • Mechanical spacers
  • M.2 to FPC board and high speed FPC cable

3.5 inch version

  • Penta SATA HAT
  • Mechanical spacers
  • M.2 to FPC board and high speed FPC cable
  • SATA 4P power cable
  • 4x SATA 22P extension cable
  • 1x eSATA cable

Display/Fan board(Optional)

  • 0.91inch OLED
  • One GPIO button
  • PWM controlled 40x40mm FAN

Other hardware needed

2.5 inch version

  • Power adapter with USB PD support more than 40W(2.5Q) or 30W(2.5D)
  • 2.5inch HDD/SSD

3.5 inch version

  • ATX Power Supply more than 120W
  • 3.5inch HDD

Model Number

The 2.5 inch version and 3.5 inch version HAT are the same hardware, the difference is the bundle accessories.

Model Description
2.5P Support 4x 2.5inch HDD/SSD
3.5P Support 4x 3.5inch HDD


Getting Started

Software support

Dimensions