Please enable javascript, or click here to visit my ecommerce web site powered by Shopify.
Jump to: navigation, search

Difference between revisions of "Penta SATA HAT"

(Supplied with this product)
(Other hardware needed)
Line 47: Line 47:
  
 
=== Other hardware needed ===
 
=== Other hardware needed ===
==== For 2.5 inch HDD ====
+
* Proper power adapter(Check power options below for more info)
* Power adapter with USB PD > 30W
+
* 2.5inch or 3.5inch HDD/SSD
* 2.5inch HDD/SSD
+
* ROCK Pi 4 with os running
+
 
+
==== For 3.5 inch HDD ====
+
* ATX Power Supply more than 100W or 12V/8A power adapter
+
* 3.5inch HDD
+
 
* ROCK Pi 4 with os running
 
* ROCK Pi 4 with os running
  

Revision as of 02:36, 12 December 2019


    Home >  SATA HAT >  Penta SATA HAT


Introduction

Penta sata hat angle.png

ROCK Pi Penta SATA HAT is an addon HAT designed for ROCK Pi 4. It utilizes the high speed PCIe buses on ROCK Pi 4 and providing a complete NAS solution based on ROCK Pi 4. It has the following features:

  • Up to 5x HDD/SSD, support 2.5inch or 3.5inch SSD, up to 100T Storage
  • 4x SATA + 1x eSATA with power
  • Utilize two lanes PCIe 2.1 buses on ROCK Pi 4
  • Type C power input with USB PD support for both 2.5inch SSD and ROCK Pi 4
  • External standard ATX power supply support for HDD and ROCK Pi 4
  • 12V DC input for HDD power and ROCK Pi 4.
  • Support HDD suspend mode
  • Support software RAID 0/1/5
  • Optional PWM control fan for HDD heat dispatching
  • Optional OLED display for IP/Storage info

Supplied with this product

  • Penta SATA HAT
  • Mechanical spacers
  • M.2 to FPC board and high speed FPC cable

SATA HAT top board(Optional)

  • 0.91inch OLED
  • One GPIO button
  • PWM controlled 40x40mm FAN
  • Cable for SATA HAT to top board

Sata hat top board.png

Metal Case(Optional)

  • Holds up to four 2.5 inch HDDs/SSDs
  • Bottom big heatsink for ROCK Pi 4 CPU
  • Supports top board
  • Top acrylic cover for OLED display
  • One button for powering off and OLED info switch
  • eSATA connector exported
  • Support fan for HDD heat dispatching air flow

Quad sata case coke.jpeg

Other hardware needed

  • Proper power adapter(Check power options below for more info)
  • 2.5inch or 3.5inch HDD/SSD
  • ROCK Pi 4 with os running

Model Number

The Penta SATA HAT is designed for ROCK Pi 4, one model only.

Model Description
PF4 Support four 2.5/3.5inch HDD/SSD plus one eSATA

Getting Started

Power Options

Software support

Dimensions