Please enable javascript, or click here to visit my ecommerce web site powered by Shopify.
Jump to: navigation, search

Dual Quad SATA HAT

Revision as of 12:02, 9 December 2019 by Hipboi (Talk | contribs)


Introduction

Quad sata hat ports.jpg

ROCK Pi Dual/Quad SATA HAT is an addon HAT designed for Raspberry Pi 4. It utilizes the high speed USB3 buses on Raspberry Pi 4 and providing a complete NAS solution based on Raspberry Pi 4. It has the following features:

  • Up to 4x HDD/SSD, support 2.5inch or 3.5inch SSD
  • Utilize two independent USB3 buses on Raspberry Pi 4
  • Type C power input with USB PD support for both 2.5inch SSD and Raspberry Pi 4
  • External standard ATX power supply support for 3.5inch HDD
  • Support HDD suspend mode
  • Support software RAID 0/1/5
  • Optional PWM control fan for HDD heat dispatching
  • Optional OLED display for IP/Storage info

Supplied with this product

Dual version

  • ROCK Pi Dual SATA HAT
  • Mechanical spacers
  • 2x USB 3.0 connection adapter *1
  • SATA 7+15P extend cable *2
  • ATX 4P power cable *1

Quad version

  • ROCK Pi Quad SATA HAT
  • Mechanical spacers
  • 4x USB 3.0 connection adapter *1
  • SATA 7+15P extend cable *4
  • ATX 4P power cable *1

SATA HAT Top board(Optional)

  • 0.91inch OLED
  • One GPIO button
  • PWM controlled 40x40mm FAN

Sata hat top board.png

Other hardware needed

For 2.5 inch HDD

  • Power adapter with USB PD support more than 40W(2.5Q) or 30W(2.5D)
  • 2.5inch HDD/SSD
  • Raspberry Pi 4 or ROCK Pi 4 with OS running

For 3.5 inch HDD

  • ATX PSU > 60W
  • 3.5inch HDDs
  • Raspberry Pi 4 or ROCK Pi 4 with OS running

Model Number

Since the Raspberry Pi 4 changes the form factor(swapping USB and RJ45), we need different USB connection adapter. Below is the different model number:

Model Description
DF3 Dual version for ROCK Pi 4, Raspberry Pi 3/3B+
DF4 Dual version for Raspberry Pi 4
QF3 Quad version for ROCK Pi 4, Raspberry Pi 3/3B+
QF4 Quad version for Raspberry Pi 4

Getting Started

Software support

Dimensions