Please enable javascript, or click here to visit my ecommerce web site powered by Shopify.
Jump to: navigation, search

Dual Quad SATA HAT

Revision as of 02:19, 8 December 2019 by Hipboi (Talk | contribs)

Introduction

ROCK Pi Dual/Quad SATA HAT is an addon HAT designed for Raspberry Pi 4. It utilizes the high speed USB3 buses on Raspberry Pi 4 and providing a complete NAS solution based on Raspberry Pi 4. It has the following features:

  • Up to 4x HDD/SSD, support 2.5inch or 3.5inch SSD
  • Utilize two independent USB3 buses on Raspberry Pi 4
  • Type C power input with USB PD support for both 2.5inch SSD and Raspberry Pi 4
  • External standard ATX power supply support for 3.5inch HDD
  • Support HDD suspend mode
  • Support software RAID 0/1/5
  • Optional PWM control fan for HDD heat dispatching
  • Optional OLED display for IP/Storage info

Supplied with this product

Dual version

  • ROCK Pi Dual SATA HAT
  • Mechanical spacers
  • 2x USB 3.0 connection adapter *1
  • SATA 7+15P extend cable *2
  • ATX 4P power cable *1

Quad version

  • ROCK Pi Quad SATA HAT
  • Mechanical spacers
  • 4x USB 3.0 connection adapter *1
  • SATA 7+15P extend cable *4
  • ATX 4P power cable *1

SATA HAT Top board(Optional)

  • 0.91inch OLED
  • One GPIO button
  • PWM controlled 40x40mm FAN

Sata hat top board.png

Other hardware needed

For 2.5 inch HDD

  • Power adapter with USB PD support more than 40W(2.5Q) or 30W(2.5D)
  • 2.5inch HDD/SSD
  • Raspberry Pi 4 or ROCK Pi 4 with OS running

For 3.5 inch HDD

  • ATX PSU > 60W
  • 3.5inch HDDs
  • Raspberry Pi 4 or ROCK Pi 4 with OS running

Model Number

The 2.5 inch version and 3.5 inch version HAT are the same hardware, the difference is the bundle accessories.

Model Description
2.5D Support 2x 2.5inch HDD/SSD
2.5Q Support 4x 2.5inch HDD/SSD
3.5Q Support 4x 3.5inch HDD


Getting Started

Software support

Dimensions