Please enable javascript, or click here to visit my ecommerce web site powered by Shopify.
Jump to: navigation, search

Dual Quad SATA HAT

Revision as of 02:14, 8 December 2019 by Hipboi (Talk | contribs)


ROCK Pi Dual/Quad SATA HAT is an addon HAT designed for Raspberry Pi 4. It utilizes the high speed USB3 buses on Raspberry Pi 4 and providing a complete NAS solution based on Raspberry Pi 4. It has the following features:

  • Up to 4x HDD/SSD, support 2.5inch or 3.5inch SSD
  • Utilize two independent USB3 buses on Raspberry Pi 4
  • Type C power input with USB PD support for both 2.5inch SSD and Raspberry Pi 4
  • External standard ATX power supply support for 3.5inch HDD
  • Support HDD suspend mode
  • Support software RAID 0/1/5
  • Optional PWM control fan for HDD heat dispatching
  • Optional OLED display for IP/Storage info

Supplied with this product

Dual version

  • Mechanical spacers
  • 2x USB 3.0 connector *1
  • SATA 7+15P extend cable *2
  • ATX 4P power cable *1

Quad version

  • Mechanical spacers
  • 4x USB 3.0 connector *1
  • SATA 7+15P extend cable *4
  • ATX 4P power cable *1

SATA HAT Top board(Optional)

  • 0.91inch OLED
  • One GPIO button
  • PWM controlled 40x40mm FAN

Sata hat top board.png

Other hardware needed

2.5 inch version

  • Power adapter with USB PD support more than 40W(2.5Q) or 30W(2.5D)
  • 2.5inch HDD/SSD

3.5 inch version

  • ATX Power Supply more than 100W
  • 3.5inch HDD

Model Number

The 2.5 inch version and 3.5 inch version HAT are the same hardware, the difference is the bundle accessories.

Model Description
2.5D Support 2x 2.5inch HDD/SSD
2.5Q Support 4x 2.5inch HDD/SSD
3.5Q Support 4x 3.5inch HDD

Getting Started

Software support