Please enable javascript, or click here to visit my ecommerce web site powered by Shopify.
Jump to: navigation, search

Difference between revisions of "Dual Quad SATA HAT"

(SATA HAT Top board(Optional))
(Other hardware needed)
Line 49: Line 49:
  
 
=== Other hardware needed ===
 
=== Other hardware needed ===
==== For 2.5 inch HDD ====
 
* Power adapter with USB PD support more than 40W(2.5Q) or 30W(2.5D)
 
* 2.5inch HDD/SSD
 
* Raspberry Pi 4 or ROCK Pi 4 with OS running
 
  
==== For 3.5 inch HDD ====
+
* Proper power adapter(Check power options below for more info)
* ATX PSU > 60W
+
* 2.5inch or 3.5inch HDD/SSD
* ATX Floppy Power 4P cable
+
* SATA 7+15P cable
+
* 3.5inch HDDs
+
 
* Raspberry Pi 4 or ROCK Pi 4 with OS running
 
* Raspberry Pi 4 or ROCK Pi 4 with OS running
 +
* optional 7+15P SATA cable(For 3.5inch HDD or extending the length)
  
 
=== Model Number ===
 
=== Model Number ===

Revision as of 02:48, 12 December 2019


    Home >  SATA HAT >  Dual/Quad SATA HAT

Introduction

Quad sata hat angle.png

ROCK Pi Dual/Quad SATA HAT is an addon HAT designed for Raspberry Pi 4. It utilizes the high speed USB3 buses on Raspberry Pi 4 and providing a complete NAS solution based on Raspberry Pi 4. It has the following features:

  • Up to 4x HDD/SSD, support 2.5inch or 3.5inch SSD
  • Utilize two independent USB3 buses on Raspberry Pi 4
  • Type C power input with USB PD support for both 2.5inch SSD and Raspberry Pi 4
  • External standard ATX power supply support for 3.5inch HDD
  • Support HDD suspend mode
  • Support software RAID 0/1/5
  • Optional PWM control fan for HDD heat dispatching
  • Optional OLED display for IP/Storage info

Supplied with this product

Dual version

  • ROCK Pi Dual SATA HAT
  • Mechanical spacers
  • 2x USB 3.0 connection adapter *1
  • CPU heatsink with fan(DF4 version only)

Quad version

  • ROCK Pi Quad SATA HAT
  • Mechanical spacers
  • 4x USB 3.0 connection adapter *1
  • CPU heatsink with fan(DF4 version only)


SATA HAT Top board(Optional)

  • 0.91inch OLED
  • One GPIO button
  • PWM controlled 40x40mm FAN

Sata hat top board.png

Metal Case(Optional)

  • Holds up to four 2.5 inch HDDs/SSDs
  • Supports top board
  • Top acrylic cover for OLED display
  • Support fan for HDD heat dispatching air flow
  • One button for powering off and OLED info switch

Quad sata case coke.jpeg

Other hardware needed

  • Proper power adapter(Check power options below for more info)
  • 2.5inch or 3.5inch HDD/SSD
  • Raspberry Pi 4 or ROCK Pi 4 with OS running
  • optional 7+15P SATA cable(For 3.5inch HDD or extending the length)

Model Number

Since the Raspberry Pi 4 changes the form factor(swapping USB and RJ45), we need different USB connection adapter. The ROCK Pi 4 shares form factor with Raspberry Pi 3/3B+. Below is the different model number:

Model Description
DF3 Dual version for ROCK Pi 4, Raspberry Pi 3/3B+
DF4 Dual version for Raspberry Pi 4
QF3 Quad version for ROCK Pi 4, Raspberry Pi 3/3B+
QF4 Quad version for Raspberry Pi 4

PINOUT

Pinout for 2x20 PIN

Description Function Pin# Pin# Function Description
1 2 VCC5V0_SYS
OLED I2C I2C_SDA 3 4 VCC5V0_SYS
OLED I2C I2C_SCL 5 6
7 8
9 10
top board key GPIO4_C2 11 12
GPIO4_C6 13 14
15 16 GPIO4_D2 reset OLED
17 18
19 20
21 22 GPIO_RST1 reset SATA1/2
23 24
25 26 ADC_IN0
SDA 27 28 SCL
29 30
31 32
control tb-fan speed PWM_33 33 34
35 36
reset SATA3/4 GPIO_RST2 37 38
39 40

Pinout for 2x5 PIN

Function Pin# Pin# Function
I2C_SDA 1 2 VCC3V3_SYS
I2C_SCL 3 4 VCC5V0_SYS
GPIO4_D2 5 6 GPIO4_C2
GND 7 8 PWM_33
GND 9 10 NC

Getting Started

Quad sata hat ports.jpg


Software support

Dimensions

Hardware Revision