Please enable javascript, or click here to visit my ecommerce web site powered by Shopify.
Jump to: navigation, search

Difference between revisions of "Dual Quad SATA HAT"

(Created page with "=== Introduction === ROCK Pi Dual/Quad SATA HAT is an addon HAT designed for Raspberry Pi 4. It utilizes the high speed USB3 buses on Raspberry Pi 4 and providing a NAS solut...")
 
Line 1: Line 1:
 
=== Introduction ===
 
=== Introduction ===
  
ROCK Pi Dual/Quad SATA HAT is an addon HAT designed for Raspberry Pi 4. It utilizes the high speed USB3 buses on Raspberry Pi 4 and providing a NAS solution based on Raspberry Pi 4. It has the following features:
+
ROCK Pi Dual/Quad SATA HAT is an addon HAT designed for Raspberry Pi 4. It utilizes the high speed USB3 buses on Raspberry Pi 4 and providing a complete NAS solution based on Raspberry Pi 4. It has the following features:
  
 
* Up to 4x HDD/SSD, support 2.5inch or 3.5inch SSD
 
* Up to 4x HDD/SSD, support 2.5inch or 3.5inch SSD

Revision as of 10:43, 23 September 2019

Introduction

ROCK Pi Dual/Quad SATA HAT is an addon HAT designed for Raspberry Pi 4. It utilizes the high speed USB3 buses on Raspberry Pi 4 and providing a complete NAS solution based on Raspberry Pi 4. It has the following features:

  • Up to 4x HDD/SSD, support 2.5inch or 3.5inch SSD
  • Utilize two independent USB3 buses on Raspberry Pi 4
  • Type C power input with USB PD support for both 2.5inch SSD and Raspberry Pi 4
  • External standard ATX power supply support for 3.5inch HDD
  • Support HDD suspend mode
  • Support software RAID 0/1/5
  • Support PWM control fan for HDD heat dispatching
  • Optional OLED display for IP/Storage info

Supplied with this product

2.5 inch version

  • Dual/Quad SATA HAT
  • Mechanical spacers
  • 4x USB connector/2x USB connector

3.5 inch version

  • Quad SATA HAT
  • Mechanical spacers
  • 4x USB connector
  • SATA 4P power cable
  • SATA 15P extend cable

Display/Fan board(Optional)

  • 0.91inch OLED
  • One GPIO button
  • PWM controlled 40x40mm FAN

Other hardware needed

2.5 inch version

  • Power adapter with USB PD support more than 40W(2.5Q) or 30W(2.5D)
  • 2.5inch HDD/SSD

3.5 inch version

  • ATX Power Supply more than 100W
  • 3.5inch HDD

Model Number

The 2.5 inch version and 3.5 inch version HAT are the same hardware, the difference is the bundle accessories.

Model Description
2.5D Support 2x 2.5inch HDD/SSD
2.5Q Support 4x 2.5inch HDD/SSD
3.5Q Support 4x 3.5inch HDD


Getting Started

Software support

Dimensions