Rock5/accessories/radxa-camera-4k
ROCK 5 > Accessories > How to use Radxa Camera 4K
Contents
How to use Radxa Camera 4K
Hardware connection
Software configuration
- Add one line to file /boot/config.txt. Like this.
dtoverlay=rock-5ab-camera-imx415
- And then execute command.
# update_extlinux.sh
- Reboot the device, you would see devices /dev/video0 to /dev/video19 are created.
- Check media pineline
# media-ctl -p
- Start rkaiq camera preview.
Execute the following command with root user in terminal on desktop.
$ sudo su # test_camera_rkaiq.sh
The content of file test_camera_rkaiq.sh
# cat /usr/local/bin/test_camera_rkaiq.sh #!/bin/bash #export GST_DEBUG=*:5 export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:/usr/lib/aarch64-linux-gnu/gstreamer-1.0 echo "Start RKAIQ Camera Preview!" # Example: Radxa Camera 4K on ROCK 5B gst-launch-1.0 v4l2src device=/dev/video11 ! video/x-raw,format=NV12,width=3840,height=2160, framerate=30/1 ! xvimagesink
Troubleshooting
- Post your issue on the forum: https://forum.radxa.com/c/rock5