Rock5/hardware/camera/
ROCK 5 > Hardware > Camera module
Contents
MIPI Camera
Radxa Camera 4K
Hardware connection
Software configuration
- Add one line to file /boot/config.txt. Like this.
dtoverlay=rock-5ab-camera-imx415
- And then execute command.
# update_extlinux.sh
- Reboot the device, you would see devices /dev/video0 to /dev/video19 are created.
- Start rkaiq camera preview.
Execute the following command with root user in terminal on desktop.
$ sudo su # gst-launch-1.0 v4l2src device=/dev/video11 ! video/x-raw,format=NV12,width=3840,height=2160, framerate=30/1 ! xvimagesink
USB Camera
Troubleshooting
- Post your issue on the forum: https://forum.radxa.com/c/rock5