RockpiN10/hardware/display - Radxa Wiki

Jump to: navigation, search

< RockpiN10‎ | hardware

Revision as of 09:46, 9 October 2021 by Ken (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

English

中文（中国大陆）‎

português do Brasil

    ROCK Pi N10 >  Hardware >  Display

Contents

1 Display on ROCK Pi N10

Display on ROCK Pi N10

This guide describes how to use display on ROCK Pi N10.

HDMI Display

Most HDMI display with USB touch works out of box.

MIPI DSI Display

Raspberry Pi 7 inch Touch Display

The official Raspberry Pi 7 inch Touch Display works on ROCK Pi N10.

Usage on Radxa official Linux system

About Hardware

For power supply, both 5V pin and GND pin on 5-pin connector on RPI LCD are connected to the 40-pin connector on ROCK Pi N10.

Use a 15-pin FPC cable to connect RPI LCD to ROCK Pi N10. Insert the 15-pin FPC like this:

About Software

Modiy /boot/uEnv.txt, enable the lcd display.

overlays=rk3399pro-console-on-uart2 rk3399pro-raspberrypi-7-inch-lcd

and then reboot your ROCKPi N10.

Now, the MIPI display work successfully.

Waveshare 3.5 inch LCD

Troubleshooting

If you have issue with Display, start a new post on the forum. https://forum.radxa.com/c/rockpin10.

Retrieved from "https://wiki.radxa.com/mw/index.php?title=RockpiN10/hardware/display&oldid=6573"