Penta SATA HAT
Introduction
ROCK Pi Penta SATA HAT is an addon HAT designed for ROCK Pi 4. It utilizes the high speed PCIe buses on ROCK Pi 4 and providing a complete NAS solution based on ROCK Pi 4. It has the following features:
- Up to 5x HDD/SSD, support 2.5inch or 3.5inch SSD, up to 100T Storage
- 4x SATA + 1x eSATA with power
- Utilize two lanes PCIe 2.1 buses on ROCK Pi 4
- Type C power input with USB PD support for both 2.5inch SSD and ROCK Pi 4
- External standard ATX power supply support for 3.5inch HDD
- Support HDD suspend mode
- Support software RAID 0/1/5
- Optional PWM control fan for HDD heat dispatching
- Optional OLED display for IP/Storage info
Supplied with this product
- Penta SATA HAT
- Mechanical spacers
- M.2 to FPC board and high speed FPC cable
- ATX 4P power cable
- 4x SATA 7+15p extension cable
- 1x eSATA cable
Display/Fan board(Optional)
- 0.91inch OLED
- One GPIO button
- PWM controlled 40x40mm FAN
Other hardware needed
For 2.5 inch HDD
- Power adapter with USB PD support more than 30W
- 2.5inch HDD/SSD
- ROCK Pi 4 with os running
For 3.5 inch HDD
- ATX Power Supply more than 100W
- 3.5inch HDD
- ROCK Pi 4 with os running
Model Number
The 2.5 inch version and 3.5 inch version HAT are the same hardware, the difference is the bundle accessories.
| Model | Description |
|---|---|
| 2.5P | Support 4x 2.5inch HDD/SSD |
| 3.5P | Support 4x 3.5inch HDD |