Rock/FreeBSD

English

中文（中国大陆）‎

español

Deutsch

português do Brasil

Status

Ganbold, a FreeBSD developer, now get FreeBSD booting on rockchip platform. Ganbold told us only basic stuffs, gpio, dwc usb host mode are working. But this is just a start :) If you are interested, ping ganbold at #radxa irc channel on freenode for more details.

How to boot FreeBSD

The instructions are at FreeBSD ARM wiki

https://wiki.freebsd.org/FreeBSD/arm/Radxa%20Rock

Ubuntu 13.10 amd64 rkflashtool build note:

1. install libusb.h by sudo apt-get -y install libusb-1.0-0-dev

2. Turn off the board. Then while pushing Recover button plug usb cable(connected to otg port) to PC and release Recover button. if rk3188 is no in recover mode you will got "rkflashtool: fatal: cannot open device" when running ./rkflashtool p > param.txt

3. Use follow Makefile:

#
all: rkflashtool

rkflashtool: rkflashtool.c
	gcc -o rkflashtool rkflashtool.c -I/usr/include/libusb-1.0/ -lusb-1.0 -O2 -W -Wall

clean:
	rm -f rkflashtool

param:
	sudo ./rkflashtool r 0x0000 0x2000 > /tmp/parm

#

Boot log

Boot log can be found here:

http://radxa.com/2013/10/18/freebsd-11-0-is-booting-on-radxa-rock/