Please enable javascript, or click here to visit my ecommerce web site powered by Shopify.
Notice: Radxa Wiki is no longer maintained and content is for reference only. Please visit the latest Radxa Documentation site: docs.radxa.com
Jump to: navigation, search

File:3d-print-case.jpg

Revision as of 09:41, 28 September 2014 by Hipboi (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Original file ‎(1,200 × 900 pixels, file size: 302 KB, MIME type: image/jpeg)

File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeThumbnailDimensionsUserComment
current09:41, 28 September 2014Thumbnail for version as of 09:41, 28 September 20141,200 × 900 (302 KB)Hipboi (Talk | contribs)
  • You cannot overwrite this file.

There are no pages that link to this file.

Metadata

This file contains additional information, probably added from the digital camera or scanner used to create or digitize it. If the file has been modified from its original state, some details may not fully reflect the modified file.
Camera manufacturer Apple
Camera model iPhone 5s
Exposure time 1/33 sec (0.03030303030303)
F Number f/2.2
ISO speed rating 50
Date and time of data generation 15:37, 28 September 2014
Lens focal length 4.15 mm
Latitude 22° 32′ 57.87″ N
Longitude 114° 5′ 24.73″ E
Altitude 27.73 meters above sea level
Orientation Normal
Horizontal resolution 72 dpi
Vertical resolution 72 dpi
Software used GIMP 2.8.14
File change date and time 17:36, 28 September 2014
Y and C positioning Centered
Exposure Program Normal program
Exif version 2.21
Date and time of digitizing 15:37, 28 September 2014
Meaning of each component
  1. Y
  2. Cb
  3. Cr
  4. does not exist
APEX shutter speed 5.0594713656388
APEX aperture 2.2750071245369
APEX brightness 3.7378652953719
APEX exposure bias 0
Metering mode Pattern
Flash Flash did not fire, auto mode
DateTimeOriginal subseconds 971
DateTimeDigitized subseconds 971
Supported Flashpix version 0,100
Color space sRGB
Sensing method One-chip color area sensor
Scene type A directly photographed image
Exposure mode Auto exposure
White balance Auto white balance
Focal length in 35 mm film 29 mm
Scene capture type Standard
GPS time (atomic clock) 07:37
Speed unit Kilometers per hour
Speed of GPS receiver 0
Reference for direction of image True direction
Direction of image 276.04550379198
Reference for bearing of destination True direction
Bearing of destination 96.045503791983
GPS date 2014:09:271
Image height 3,264 px
Image width 2,448 px
Retrieved from "https://wiki.radxa.com/mw/index.php?title=File:3d-print-case.jpg&oldid=1087"