Penta SATA HAT

Introduction

ROCK Pi Penta SATA HAT is an addon HAT designed for ROCK Pi 4. It utilizes the high speed PCIe buses on ROCK Pi 4 and providing a complete NAS solution based on ROCK Pi 4. It has the following features:

• Up to 5x HDD/SSD, support 2.5inch or 3.5inch SSD, up to 100T Storage
• 4x SATA + 1x eSATA with power
• Utilize two lanes PCIe 2.1 buses on ROCK Pi 4
• Type C power input with USB PD support for both 2.5inch SSD and ROCK Pi 4
• External standard ATX power supply support for 3.5inch HDD
• Support HDD suspend mode
• Support software RAID 0/1/5
• Optional PWM control fan for HDD heat dispatching
• Optional OLED display for IP/Storage info

Supplied with this product

• Penta SATA HAT
• Mechanical spacers
• M.2 to FPC board and high speed FPC cable
• ATX 4P power cable
• 4x SATA 7+15p extension cable
• 1x eSATA cable

Display/Fan board(Optional)

• 0.91inch OLED
• One GPIO button
• PWM controlled 40x40mm FAN

Other hardware needed

For 2.5 inch HDD

• Power adapter with USB PD support more than 30W
• 2.5inch HDD/SSD
• ROCK Pi 4 with os running

For 3.5 inch HDD

• ATX Power Supply more than 100W
• 3.5inch HDD
• ROCK Pi 4 with os running

Model Number

The 2.5 inch version and 3.5 inch version HAT are the same hardware, the difference is the bundle accessories.

Model	Description
2.5P	Support 4x 2.5inch HDD/SSD
3.5P	Support 4x 3.5inch HDD