Difference between revisions of "Taco"
| Line 29: | Line 29: | ||
Just copy the command above and paste it into the terminal and press enter. | Just copy the command above and paste it into the terminal and press enter. | ||
| + | |||
| + | === Getting Started === | ||
| + | |||
| + | ==== Power ==== | ||
| + | |||
| + | {| class="wikitable" | ||
| + | ! | ||
| + | ! Power Consumption | ||
| + | |- | ||
| + | | SSD | ||
| + | | <3W | ||
| + | |- | ||
| + | | 2.5 HDD | ||
| + | | 3 ~ 5W | ||
| + | |- | ||
| + | | 3.5 HDD | ||
| + | | 5 ~10W | ||
| + | |} | ||
| + | |||
| + | We provide a 12V/5A DC(5.5*2.1) power supply. | ||
Revision as of 08:10, 19 September 2022
Radxa Taco
Introduction
Radxa Taco is a complete NAS/Router solution designed based on the Raspberry Pi Compute Module 4. It utilizes the high-speed PCIe buses on CM4 for ultra-fast network connectivity and storage IO. It comes with the following features:
- Up to 5x HDD/SSD, support 2.5inch or 3.5inch SSD
- High-speed PCIe switch for SATA & Ethernet
- One 2.5G Ethernet and one native GbE
- One M.2 M Key for NVMe SSD
- One M.2 E Key for WiFi 6 modules or Google Coral AI module
- 12V DC power input for 2.5 and 3.5-inch HDD
- External standard ATX power supply support for 3.5inch HDD
- Support HDD suspend mode
- Support software RAID 0/1/5
- Support USB Direct Access Mode from PC(USB 2.0 only)
- Optional PWM control fan for HDD heat dispatching
- Optional OLED display for system info such as IP address or Storage usage
(Image credit: @geerlingguy)
Software support
We have provided a script to help control the Taco fan
curl -sL https://rock.sh/get-taco | sudo -E bash -
Just copy the command above and paste it into the terminal and press enter.
Getting Started
Power
| Power Consumption | |
|---|---|
| SSD | <3W |
| 2.5 HDD | 3 ~ 5W |
| 3.5 HDD | 5 ~10W |
We provide a 12V/5A DC(5.5*2.1) power supply.